558415
31
Zoom out
Zoom in
Previous page
1/118
Next page
4.7 Surface mounting
The display can be surface mounted using the
optional surface mounting kit.
Before mounting the unit ensure that you have:
selected a suitable location (a clear, at area with
suitable clearance behind the panel is required).
installed the transducer and routed the power /
transducer cable to the selected location.
1. Fix the surface mount adaptor template to the
selected location, using masking or self-adhesive
tape.
2. Using a suitable hole saw (the size is indicated
on the template), make a hole in each corner of
the cut-out area.
3. Using a suitable saw, cut along the inside edge
of the cut-out line.
4. Ensure that the surface mount adaptor ts into
the removed area and then le around the rough
edge until smooth.
5. Drill 4 holes as indicated on the template to
accept the surface mount adaptor’s securing
bolts.
6. Place the rear gasket onto the surface mount
adaptor and press rmly onto the ange.
7. Place the surface mount adaptor into the
prepared hole and secure using the nuts,
washers, and bolts provided.
0
0
0
0
0
0
0
0
0
0
0
00
00
00
x4
D12 64 6-1
8. Attach the front gasket to the surface mount
adaptor.
9. Place the display into the surface mount adaptor.
10.Secure the mounting studs to the rear of the
display.
11. Place the O-rings over the mounting studs
and position in the recess around the adaptors
mounting holes.
12.Secure the display to the surface mount adaptor
from the rear using the thumb nuts provided.
00
00
0
D12654-2
13.Connect the power / transducer cable to the
display.
Note: The appropriate torque to use when drilling
depends on the thickness of the mounting surface
and the type of material.
Note: The supplied gasket provides a seal
between the unit and a suitably at and stiff
mounting surface or binnacle. The gasket should
be used in all installations. It may also be
necessary to use a marine-grade sealant if the
mounting surface or binnacle is not entirely at and
stiff or has a rough surface nish.
Mounting
31
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Raymarine Dragonfly at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Raymarine Dragonfly in the language / languages: English as an attachment in your email.

The manual is 11,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Raymarine Dragonfly

Raymarine Dragonfly User Manual - German - 96 pages

Raymarine Dragonfly User Manual - Dutch - 96 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info