469994

Raymarine Digital Radome Scanner RAYMARINE Manual

21
Zoom out
Zoom in
Previous page
1/29
Next page
Maintenance and troubleshooting 17
Maintenance and troubleshooting
CAUTION: System power
Always turn the radar system OFF before carrying out any
routine maintenance on the scanner or nearby equipment.
Introduction
DO NOT remove the rear cover of the multi-function display or the
external cover of the Digital Radome scanner. There are no user serviceable
parts or adjustments. DO NOT attempt to service the equipment.
Maintenance
Maintenance is limited to the following periodical checks:
• Examine the cables for signs of damage, such as chafing, nicks and
cuts. If the connector is showing signs of corrosion, lightly grease the
threads of the connector with “Renolit Aqua 2 Calcium” grease.
• Check that the cable connectors are firmly attached.
• Make sure the scanner is still securely attached to the mounting
surface.
• Once a year, remove, grease and re-attach the mounting bolts securing
the scanner.
Troubleshooting
The following table will help you identify the most likely cause of a
problem, and the corrective action required to restore normal operation.
Problem Possible causes and solution
“No Data” or “No Scanner”
message
1. Check that the cable connecting the
Digital Radome scanner to the multi-
function display unit is firmly attached
and undamaged.
2. Check relevant scanner fuses and
breakers.
3. Check that the power source is of the
correct voltage and sufficient current.
4. Software mismatch between equip-
ment may prevent communication.
Contact Raymarine technical support.
If using a SeaTalk
hs
Switch:
5. Check that all radar scanners are
correctly connected to the SeaTalk
hs
switch.
6. Check the status of the SeaTalk
hs
switch.
7. Check that SeaTalk
hs
cables are free
from damage.
The bearing displayed on the
multi-function display is not
the same as the actual
bearing.
Perform the bearing alignment proce-
dure described in the installation guide
for the relevant multi-function display
unit.
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Raymarine Digital Radome Scanner RAYMARINE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Raymarine Digital Radome Scanner RAYMARINE in the language / languages: English as an attachment in your email.

The manual is 1,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info