40175
32
Zoom out
Zoom in
Previous page
1/54
Next page
26 C-Series Displays Installation Manual
3. Working from this corner, free the clips along the top edge of the display, then work
towards the bottom edge. Taking care to ensure that the control buttons pass
through the bezel. DO NOT lever along the top edge.
4. Carefully free the locating clips at the bottom of the bezel by lowering it away from
the unit - DO NOT USE A SCREWDRIVER FOR THIS AS IT WILL DAMAGE THE CLIPS.
5. Remove the bezel from the display.
3.3 Cables
This section details how to instal and connect all the relevant cables to your C-Series
Display:
Siting and securing cables
Please note the following:
All cables should be adequately secured, protected from physical damage and
exposure to heat. Avoid running cables through bilges or doorways, or close to
moving or hot objects.
Connectors should be protected from damage. If it proves necessary to pull cables
through a bulkhead or deckhead using a cord, this should be attached several
inches behind the connector. Do not attach a tie immediately behind or
around the connector.
Acute bends must be avoided.
Where a cable passes through an exposed bulkhead or deckhead, a watertight
feed-through should be used.
Secure cables in place using tie-wraps or lacing twine. Coil any extra cable and tie
it out of the way.
Connecting cables
You will need to install and connect the following cables to ensure that your display
functions correctly:
SeaTalk cable (if SeaTalk system connected).
NMEA cable (if third party equipment, NMEA multiplexer, fast heading sensor,
RS232 interface or course computer fitted).
•SeaTalk
2
cable (if Sea Talk
2
system connected).
Radar cable (not supplied).
•Power cable.
The cable connections are located on the back of the unit. If a trunnion bracket is being
used, all cables can be connected prior to mounting the unit. Please read the details
relating to each cable before connecting them.
87020-3.book Page 26 Tuesday, March 7, 2006 11:02 AM
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Raymarine C70 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Raymarine C70 in the language / languages: English as an attachment in your email.

The manual is 2,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Raymarine C70

Raymarine C70 Additional guide - English - 19 pages

Raymarine C70 User Manual - English - 240 pages

Raymarine C70 Quick start guide - German - 20 pages

Raymarine C70 Installation Guide - German - 56 pages

Raymarine C70 User Manual - German - 266 pages

Raymarine C70 Additional guide - Dutch - 9 pages

Raymarine C70 Additional guide - Dutch - 28 pages

Raymarine C70 User Manual - Dutch - 238 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info