558423
65
Zoom out
Zoom in
Previous page
1/460
Next page
4.10 Thermal camera connection
You can connect a thermal camera to your New c
Series or New e Series multifunction displays.
Note: New a Series does not support thermal
cameras.
The camera is usually connected via a Raymarine
network switch. If you want to use the optional
Joystick Control Unit (JCU) with the camera this
must also be connected to the network switch. A
composite video connection is required between the
camera and the multifunction display.
T200 Series thermal camera connection
D12839-1
3
2
1
4
5
1. T200 Series xed mount thermal camera.
2. Multifunction display.
3. Power over Ethernet (PoE) Injector.
4. RayNet to RJ45 SeaTalk
hs
adaptor cable.
5. Video cable.
T300 / T400 Series thermal camera connection.
2
3
4
56
D12260-1
1
8
7
SeaTalk
hs
/ RayNet
SeaTalk
hs
/ RayNet
SeaTalk
hs
/ RayNet
1. Multifunction display
2. Raymarine network switch
3. Joystick Control Unit (JCU), optional
4. SeaTalk
hs
to RayNet cable
5. Ethernet cable coupler.
6. PoE (Power over Ethernet) injector (only
required if using the optional JCU).
7. Thermal camera
8. Video connection
Important notes
You can control the thermal camera using your
multifunctional display. The Joystick Control Unit
(JCU) is optional, but can be used in conjunction
with the multifunctional display to control the
thermal camera if required.
“Dual payload” thermal cameras include 2
independent lenses; 1 for thermal (infrared) and
1 for visible light. If you only have 1 display you
should only connect the video cable labelled “VIS
/ IR” (visible light / infrared) to the display. If you
have 2 or more displays you should connect 1
cable to each display.
You can only view the thermal camera image on
the multifunction display to which the camera is
physically connected. If you want to view the
thermal camera image on more than 1 display you
must obtain a suitable third-party video distribution
unit.
For further information regarding the camera's
installation (including connections and mounting),
refer to the installation instructions that accompany
the camera.
Thermal camera cables
Cabling requirements for thermal cameras.
Camera to network switch
A network patch cable is required to connect the
camera to the network switch. The connection is
made between the camera cable tail and the network
switch via the coupler (supplied with the camera).
Network patch cables are available in a variety of
lengths.
Joystick Control Unit (JCU)
An Ethernet (with power) cable is used to connect
the JCU. The JCU is supplied with a 7.62 m (25 ft)
Ethernet cable for this connection. If you require
a different length contact your dealer for suitable
cables.
Power over Ethernet (PoE) injector to network
switch
A network patch cable is required for connecting the
PoE injector to the network switch. Network patch
cables are available in a variety of lengths.
Video cables
Video cables are not supplied with the product.
Please contact your dealer for suitable cables and
adaptors.
Raymarine recommends the use of a BNC
terminated RG59 75ohm (or better) coaxial cable.
Cables and connections 65
65


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Raymarine c Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Raymarine c Series in the language / languages: English as an attachment in your email.

The manual is 30,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Raymarine c Series

Raymarine c Series User Manual - German - 396 pages

Raymarine c Series User Manual - Dutch - 394 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info