672986
33
Zoom out
Zoom in
Previous page
1/60
Next page
Chapter 4: Location and mounting 33
To prepare the mounting bracket:
1. Remove the four screws (1) from the cover (2) and retain for
later use.
2. Remove the cover (2) by lifting it away from the bracket (6).
3. Remove the cable seal (3) from the bracket, taking care not to
damage the attached blanking plugs.
4. Remove the small securing screws (4) from the locking ring (5)
and retain for later use.
5. Turn the locking ring counter-clockwise to unlock it from the
bracket and remove.
6. Push the base plate (7) and O-ring (10) away from the bracket.
Installing the base plate
Note: Careful installation of the base plate is required to preserve
watertight integrity.
To install the base plate:
1. Use adhesive tape to attach the mounting template in the
required position.
2. Mark the position of the four securing screws (8) and the cable
hole.
3. Ensure that there are no cables or equipment behind the
mounting surface that can be damaged, then use the hole saw
to remove the material from the cable hole.
4. Use the file to remove any burrs from around the cable hole
5. Drill a 9/16” (3 mm) pilot hole at each of the marked screw
positions.
6. Carefully place the O-ring (10) in the groove on the underside of
the base plate.
7. Pass the power cable and if applicable, the sonar and SeaTalk
ng
cables through the centre hole of the base plate.
8. Secure the base plate into position using the supplied screws,
ensuring that the O-ring remains in position.
Note: For fiberglass mountings, countersink each of the pilot holes
to prevent damage to the gelcoat when driving in the screws.
Re-assembling the bracket
The mounting bracket can now be re-assembled to the base plate.
D11237-1
A70
A57
A50
Ensure 60 m
m
(2.36
in)
m
inim
um
cable clearance
from rear of bracket
A Series
m
ounting
bracket
tem
plate
Cut hole,
35 mm (1.3/8 in)
diameter
Rotation
stop
Centre for
mounting
screw (x4)
A
Series display unit
D
112
25-1
Clearance required
for chart door
D11351-1
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Raymarine A57D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Raymarine A57D in the language / languages: English as an attachment in your email.

The manual is 2,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Raymarine A57D

Raymarine A57D User Manual - English - 156 pages

Raymarine A57D Installation Guide - German - 60 pages

Raymarine A57D User Manual - German - 162 pages

Raymarine A57D Installation Guide - Dutch - 62 pages

Raymarine A57D User Manual - Dutch - 166 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info