789180
21
Zoom out
Zoom in
Previous page
1/50
Next page

If the chassis connection is to the negative
pole, start by attaching the red clamp onto
the batterys positive terminal (red, plus).
Then attach the black clamp onto a piece of
exposed metal on the chassis. It must not be
attached to the carburettor, the fuel line or
any painted metal parts.
Only now should you connect the battery
charger to the mains power.
Press the MODE button (1) one or more
times to select the charging function. The
corresponding symbol lights up on the
display (2).
You can choose between the following
charging functions:
Charging a 12V standard battery (A),
which switches off at a voltage of 14,5 V.
12V-charging at low temperature (B),
which charges with 4A and switches off
at 14,7V
Charging a 12V GEL battery ©, which
switches off at 14,2V
Charging a 12V LiFePo4 battery (D),
which switches off at 14,7V
Slow 12V charging (E), which switches off
at 14,4V
Slow charging of older batteries (F),
which turns off at 15,8V
Charging of a 6V battery with 2A (G),
which switches off at 7,2V
In order to nish charging, turn the battery
charger off at the mains socket.
First disconnect the black battery clamp
from the battery from the chassis connection
and then disconnect the red battery clamp
from the battery.

If the symbol (H) is displayed a few seconds
after you plug the battery charger into
an electrical socket, it may be due to the
following error:
1) The battery clamps are connected to the
wrong poles. Unplug the battery charger
from the electrical socket, change the
battery clamps round, and plug the
battery charger back in.
2) The batterys voltage is too low.
3) The batterys voltage is too high.
4) The battery or its cells have short
circuited.
Correct the error and restart the charging
process.
If problems arise during the charging of a
battery, the battery, should be examined
by an expert.

Wipe the battery charger down regularly
using a well-wrung cloth.
uid gets onto the battery
charge, it must be wiped off immediately.
GB
The charging process occurs automatically
in 8 steps, which are controlled by a
microprocessor.
All LED lights flash 2 times when powered
on. When under load, the 12V STD MODE
LED light will blink quickly.
During charging, the LED light will slowly
blink. When the battery is 100 charged,
the LED will light up constantly.
21
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rawlink 70746 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rawlink 70746 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3.03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info