597724

Ravelli OLIVIA Manual

19
Zoom out
Zoom in
Previous page
1/76
Next page
Pag.19
EN
In the lower part of the flue, a union tee has been mounted with an
inspection cap.
A 90° bend should not be installed as the first initial piece as the ashes
would quickly obstruct the passage of smoke, causing problems for the
draught of the flue. (See Fig. 6).
This type of installation (se Fig. 10) does not require an insulated flue as
the smoke tube has been assembled partly inside the house and partly
inside an existing flue.
In the lower part of the flue a union tee has been installed with a peephole
cap.
A 90° bend should not be installed as the first piece, as the ash would
quickly block the passage of smoke, causing problems for the draught of
the flue (See Fig. 6).
Please note the use of 2 45° bends, to guarantee that the ash falls in the
union tee with a peephole.
This type of installation (see Fig. 5), does not require an insulated flue, as
all the whole pipe has been assembled outside the house.
A union tee has been mounted in the lower part of the flue with a peep-
hole. A 90° bend should not be installed as the first piece as the ashes
would quickly block the passage of smoke, causing problems for the
draught of the flue. (See Fig. 6).
Fig.6
Ash deposited in the 90° bend
NO
34 445
INTERNAL FLUE
Airtight steel sheeting
Covering plate
YES
Union tee for condensation
45° bend, diam.80
Fig.10
YES
Fig.5
Protection from rain
INSTALLATION WITH INTERNAL FLUE.
Union tee for condensation
Fig.8
NO
Pipe not
insulated
Ash deposited in the 90° bend
Protection from rain
INSTALLATION WITH INTERNAL/EXTERNAL FLUE
Fig.7
Insulated pipe
Union tee for condensation
coibentato
Union tee for condensation
Insulated fl ue
YES
Pipe not
insulated
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ravelli OLIVIA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ravelli OLIVIA in the language / languages: English, German, Danish, French, Italian, Spanish as an attachment in your email.

The manual is 3,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info