Manual Ravelli FLAVIA (page 23 of 76) (English, German, Danish, French, Italian, Spanish)

597715

Zoom out

Zoom in

1/76

Pag.23

8.2. Comfort clima

To enter in the USER MENU press two times key OK.

To enter in the menu “COMFORT CLIMA” press 6 times key 2 and con-

firm with OK. To modify the settings use keys 1 and 2 and by pressing OK

you confirm the data and go on to the following one.

By last confirmation with OK you save all settings and return automati-

cally to the screen with the icons.

To return to the main screen press at the same time keys 1 and 2.

EXAMPLE:

to activate it, press button P5 setting a value

other than OFF and the following strings will

appear on the display

The modulation phase is reached, as the

set room temperature has been reached. If

the temperature is maintained for about 4

minutes, the stove will shut down.

After the switching off phase, the display will

show ECO STOP. The stove will remain in

this state until the temperature drops to ap-

proximatly 18°C and only then will the igni-

tion phase be restarted.

The value set (in this case 2) has activated

the Comfort Clima function. FUNCTIONING:

The value sets the temperature the stove

goes back on again. Example

- room temperature set at 21°

- Comfort Clima value set at 2

with this setting, the stove will switch off when

21°C is reached and will be switched back

on when the room temperature is 18°C (21°C

– 2 – 0,5 = 18°C). The following strings will

appear in sequence on the display:

The functioning of the stove in COMFORT CLIMA mode can start up

the phase of ignition and switching off several times through the day:

this can compromise the duration of the resistance for the automatic

ignition of the stove.

8.3. Mode SILENCE (to activate see para. 7.2.8)

Mode SILENCE has been realized for reducing noise level of fan. It re-

duce the speed of the fan in all five working power.

Use is suggested especially during night time.

8.4. Mode SELF CONTROL SYSTEM (S.C.S. to activate see

para 7.2.9)

Mode SELF CONTROL SYSTEM (S.C.S) has been realized allowing the

stove to recognize faster an eventual problem just in case

you are out of home of far from the stove.

8.5. SERVICE HOURS

All our models need in addition to the regular cleaning (reference to the

paragraph dedicated to the maintenance of the stove in the user manual),

also a special cleaning which should be done by the installer (authorized

by the producer).

At the time of the installation it is possible to set a number of working hours

appropriate for the model following this procedure default settings>>extra

parameters>>TF53 service hours. At the end of these hours on the dis-

play will appear the message “SERVICE HOURS” followed by an acoustic

signal. When this message appears please contact the installer to do the

special cleaning of the stove.

If the cleaning is not done the message will appear by each ignition but

will not interrupt the functioning of the stove.

8.6. Automatic loading of the screw

To load automatically the screw (when the stove is new or the loading

scew is empty) please do following operations:

ENTER IN THE MENU

PRESS KEY OK TO

“STOVE STATUS”

ACTIVATE THE SCREW

Screw OFF Screw ON

1 2

To return to the main screen press at the same time keys 1 and 2.

Alternatively it is possible to exit by step from the menus by pressing each

time the key OK. Repeat the operation several times until you see the

pellet fall into the firepot.

It is possible to do this operation only if the

stove is in FINAL CLEANING phase or OFF.

8.7 Operating precautions

• In case of faulty operation turn the stove off pressing button no. 3.

• Do not manually load the fire pot with pellets.

• Any build up of unburned pellets inside the fire pot after repeatedly

trying to light the stove, must be removed before further attempts.

• Do not use any fuels other than wood pellets.

• Should the ignition system be faulty, do not attempt to light the stove

using flammable materials.

8.8. Remote control

IR receiver for remote control (12 volts batteries code LRV08 not included)

BASIC FUNCTIONS

• P1 - P2 Set temperature

allows to set the desired value for the

room temperature from “EST” to “MAN“

• P4 - P5 Set power

allows to set the working power between a

range of minimum 1 to maximum 5

• OK

by keeping pressed for 2 second longs it allows the manual

switch on and off of the stove

ADVANCED FUNCTIONS

• OK multifunction

if you press one time you can enter in the main

menu and the conﬁ rmation of the setting. It is possible to exit step by

step from each menu by keeping pressed each time.

• P1 - P4

multifunction

to scroll the icons in the menu

• P2 - P5 multifunction to modify the setting in the men

8.9. Synthetic table of phases

PHASE DESCRIPTION

FINAL CLEANING The stove is switching off, the cooling phase is not yet completed

ON The ignition phase has started,the pellets are loaded into ﬁ rebox

WAITING FOR FLAME The pellet is lighted by the hot air passing trought the ignition candle

FLAME PRESENT The ﬂ ame is visibile in the ﬁ re pot

WORKING The stove completed switch ON phase; you can change power

MODULATION WORKING The room temperature set has been reached

ECO STOP Comfort Climate activated, temperature set has been reached; the

stove is off.

T ON The room sensor is off or an external thermostat has been con-

nected

COOLING/WAITING FOR

START The stove is cooling DOWN:when stove is cooled down can start

automatically.

COOLING/WAITING FOR

RESTART The stove is in the cooling DOWN:when stove is cooled down can

restart automatically.

ON/WAITING FOR RESTART The switch ON phase, when the stove is warm, started. The opera-

tion is same of phase ON

HOT SMOKE The max temperature of smokes is reached: to reduce temperature,

feeding pellets and air draft reduce at POWER 01

OFF The stove is off

9. MAINTENANCE

Before carrying out any maintenance operation on the stove, please take

the following precautions:

•

Make sure that all the parts of the stove are cold

•

Make sure that the ashes are completely extinguished

•

Make sure that the general switch is in the zero position (off)

•

Make sure that the plug is disconnected from the socket, thus avoiding

accidental contacts

PLEASE FOLLOW THE INSTRUCTIONS FOR CLEANING

SHOWN BELOW CAREFULLY! FAILURE TO OBSERVE THEM

MAY LEAD TO PROBLEMS IN THE FUNCTIONING OF THE

STOVE.

9.1. Cleaning the surfaces

To clean the surfaces on the painted metal parts, use a wet cloth in water

or at the most, water and soap.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ravelli FLAVIA in the language / languages: English, German, Danish, French, Italian, Spanish as an attachment in your email.

The manual is 3,8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ravelli FLAVIA Manual

Product: