643475
19
Zoom out
Zoom in
Previous page
1/64
Next page
Pag.19
EN
functioning of the stove. If the flue is dilapidated, steel pipes
with insulation (vermiculite, rock wool) must be inserted.
Smoke can be discharged directly into the flue only if it has a
maximum section of 15x15cm or Ø15cm. In any case, it must
have an inspection hatch.
Avoid allowing the steel pipe to come into contact with combus-
tible material (wooden beams).
Installation with external ue:
This type of installation (see Fig. 11) does not require an insulated
flue for the section inside the home, while it is obligatory to use insu-
lated pipes for the external section.
A “T” union has been fitted outside, in the lower part of the pipes, so
that the section can be inspected.
You are advised not to install two 90° elbows since ashes would soon
block the flow of smoke, causing problems for the stove’s draught
(see Fig. 12).
IMPORTANT NOTES
It is obligatory to create an initial vertical section of 1.5 mt min. to
guarantee the correct expulsion
of smoke.
Installation with internal ue:
This type of installation (See Fig.
13) does not require an insulated
flue, since part of the smoke duct
has been mounted inside the
home.
The lower part of the duct can be
inspected.
Fig.10
INTERNAL FLUE
Lairtight steel sheeting
Covering plate
NO
Ash deposited in the 90° bend
90° bend
Plasterboard covering
Insulated pipe
Protection from rain
Raccordo a T per
condensa coibentato
Insulated ue
YES
Pipe not
insulated
Fig.11
Fig.13
Protection from rain
YES
Pipe not insulated
NO
Ash deposited in the 90° bend
Fig.12
Protection from rain
Standard supply on all insert stoves
INSPECTION HATCH REMOVE
THE FRONT PLATE AND CLEAN
INSIDE WITH A
VACUUM CLEANER
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ravelli 900 Camino Flat at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ravelli 900 Camino Flat in the language / languages: English, German, Danish, French, Italian, Spanish as an attachment in your email.

The manual is 10,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info