Manual Ravelli 500 (page 22 of 64) (English, German, Danish, French, Italian, Spanish)

643471

Zoom out

Zoom in

1/64

Pag.22

want in that room, irrespective of the one set in the room set during

manual running. As soon as the room temperature reaches the set

value, the stove goes on to MODULATE or COMFORT CLIMATE (if

activated).

23 °C

PROG - 1

SET TAMB

Use keys P1 and P2 to set the

required temperature.

Press P7 to confirm.

Carry out the same operations, changing times and days of

activation for PROG-2 as well.

USING THIS MODE, YOU HAVE TO MAKE SURE EACH

TIME THAT AFTER THE STOVE IS AUTOMATICALLY

SWITCHED OFF, THE FIRE POT REMAINS CLEAN IN OR-

DER TO GUARANTEE CORRECT AUTOMATIC IGNITION.

8. DESCRIPTION OF THE SYMBOLS AND DISPLAYS

8.1. Symbols

10:35

20°C P - 1

WORK

CLOCK

AMBIENT TEMPERATURE (TAKEN IN THE REMOTE

CONTROL POSITION)

STOVE STATUS

CHRONOTHERMOSTAT

WORKING POWER

9. DESCRIPTION OF THE FUNCTIONS

9.1. Modification of the working power

To modify the working power, press button P5 to enter the appropri-

ate menu and with buttons P1 and P2 set the desired power from 1 to

5. By increasing the power, the consumption of pellets and the speed

of the exchanger fan increase. The power setting cannot be modified

in the MODULATION WORK phase.

9.2. Modulation

During the working phase, the aim of the stove is to reach the ambient

temperature set; when the setting is reached, the stove will function in

MODULATION WORK mode. During this phase, consumption of the fuel

will be minimal and the ambient fan will function at minimum power.

9.3. Comfort clima

To access this function, press P4 for four seconds.

When room temperature is reached, the electronic board reduces

pellet consumption to the minimum activating the modulation phase,

after which the stove checks if this temperature is maintained for a

pre-established period of time and if this happens, it passes auto-

matically to ECO STOP (the stove goes out).

OFF

COMFORT

CLIMA

to activate it, press button P5 setting a value

other than OFF and the following strings will

appear on the display

2°

COMFORT

CLIMA

The value set (in this case 2) has activated the

Comfort Clima function.

FUNCTIONING:

The value sets the temperature the stove goes

back on again. Example:

- room temperature set at 21°

- Comfort Clima value set at 2

with this setting, the stove will switch off when

21°C is reached and will be switched back on

when the room temperature is 18°C (21°C – 2

– 0,5 = 18°C). The following strings will appear

in sequence on the display:

P - 2

10:30 21°

WORK

MODUL

The modulation phase is reached, as the

set room temperature has been reached. If

the temperature is maintained for about

4 minutes, the stove will activate the

switching off phase.

P - 2

10:34 21°

ECO

STOP

After the switching off phase, the display

will show ECO STOP. The stove will re-

main in this state until the temperature

drops to 18°C and only then will the ignition

phase be restarted.

N.B.: The functioning of the stove in COMFORT CLIMATE mode

can start up the phase of ignition and switching off several

times through the day: this can compromise the duration of the

resistance for the automatic ignition of the stove.

USING THIS MODE, YOU HAVE TO MAKE SURE EACH

TIME THAT AFTER THE STOVE IS AUTOMATICALLY

SWITCHED OFF, THE FIRE POT REMAINS CLEAN IN OR-

DER TO GUARANTEE CORRECT AUTOMATIC IGNITION.

9.4. Modifications of the room temperature setting

The modes of functioning of the stove with the ambient thermostat

activated can be divided into two types:

•

ambient thermostat included in the remote control

•

with external thermostat (not supplied)

•

Comfort Climate mode

To access the menu press P4, and set the temperature using keys

P1 and P2.

AMBIENT THERMOSTAT MODE INCLUDED IN THE REMOTE

CONTROL

The display is fitted with an ambient thermostat. The recorded tem-

perature is visible on the display (see par. 8.1).

EXTERNAL THERMOSTAT MODE (NOT SUPPLIED)

If an external thermostat is used, correctly connected to the board

as shown in the electric wiring diagram (see page 25), the room tem-

perature will no longer be shown on the display but T ON. The room

temperature will be regulated directly by the wall-mounted thermo-

stat. When the temperature set on the display is reached, MODULA-

TION WORK will appear and in this case the stove will reduce the

consumption of pellets to a minimum, reducing the heating power to

a minimum.

1 2 3 5 6 7 8 9 104

-TC1+TERM.

SMOKE PROBEROOM

TERMOSTAT

-TC1+TERM.N.AMB.N.H2ON.PEL.

RED

BLUE

9.5. Setting pellet-air mixture

The pellet-air blend setting makes it possible to regulate smoke

suction and the quantity of pellet loaded in a simple way. This

allows combustion to be regulated according to the stove’s draught

and the hardness of the pellet. To access regulation press key

P6.The following strings will appear on the display:

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ravelli 500 in the language / languages: English, German, Danish, French, Italian, Spanish as an attachment in your email.

The manual is 10,04 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ravelli 500 Manual

Product: