802099
42
Zoom out
Zoom in
Previous page
1/48
Next page
42 Ratio Solid Charger Manual
10. Troubleshooting
The charger is equipped with monitoring software that detects faults and displays them as
error messages in the display. Every fault has a specific error code for easy identification. An
overview of the error codes is shown below.
Error code Fault Possible solution
100 CP error, faulty values or
short circuited.
Possible causes:
Damaged charging cable
Dirty connectors
Issue originating from the
EV.
Switch off the power to the main grid.
Clean the connector(s) of the charging
cable.
Check the cable for any visible damage.
Switch the power to the main grid back on.
Try charging with a different charge cable.
Try charging a different EV.
Try charging the EV with a different charger.
If the error persists:
Please contact Ratio or a qualified electrician
to have the cable inspected/replaced.
101 Grounding fault
Possible causes:
Damaged charging cable
Damaged charger
Switch off the power to the main grid.
Switch the power to the main grid back on.
Press and hold for 10 seconds to power
cycle the charger.
If the error persists, Please contact Ratio or
a qualified electrician to have the charger
inspected.
102/112 Maximum temperature
exceeded while charging.
Possible cause: long, high
current charging sessions in
high ambient temperatures.
Allow the charger to cool down before
resuming the charging session. When the
charger has cooled down, the error code
disappears and the charger returns to regular
operation.
111 No communication between
the charger and the
Sensorbox.
Check if the connectors are properly inserted
in the Sensorbox and charger.
Check if the Sensorbox is powered.
Check the data cable for visible damages.
Replace the data cable if necessary.
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ratio Solid_ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ratio Solid_ in the language / languages: English as an attachment in your email.

The manual is 26.2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info