802099
34
Zoom out
Zoom in
Previous page
1/48
Next page
34 Ratio Solid Charger Manual
To enter the INSTALLER SETUP menu, press: ,
, , , and .
INSTALLER SETUP
<- CHG MODE ->
Note: After 2 minutes of inactivity, the display automatically returns to the Home screen
without saving changes.
Note: It is not possible to enter the settings menu during a charging session.
Use & to switch between the settings and press to enter the selected setting.
Configure the following settings for the charger.
CHG MODE Select the desired charge mode.
Available options: Basic, Smart, SmartSolar, PureSolar.
Default: SmartSolar
Note: PureSolar mode is not compatible with Power Sharing. If you set the charge mode to
PureSolar, Power Sharing will be disabled.
Note: See chapter 2 for more information on the charge modes.
Power Sharing
configuration
If you have a single charger, leave this option Disabled.
If you have multiple chargers interconnected with data cables,
activate Power Sharing.
Set the charger that is directly connected to the Sensorbox to:
Main Controller
Available options: Disabled, MAIN, SUB1, SUB2, SUB3.
Default: Disabled.
Note: Make sure every sub charger is set to a unique SUB number.
Note: Make sure only one of the interconnected chargers is set to “Main Controller”.
Note: PureSolar mode is not compatible with Power Sharing. If you enable Power Sharing,
the charge mode will be set to SmartSolar.
I-MAX HOME Set this value to the size of the grid connection as measured by the
CT clamps. E.g. if the home has a 3× 25A connection, set this value
to 25A. This value is used for Dynamic Load Balancing.
Range: 10A – 99A.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ratio Solid_ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ratio Solid_ in the language / languages: English as an attachment in your email.

The manual is 26.2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info