632974
43
Zoom out
Zoom in
Previous page
1/49
Next page
Model 140T/140F Owner’s Manual
EMC Part: 44000700 • Rev.02 • 04/19/06
37
ELECTRIC
MOBILITY
Stiffness in steering 1. Possible grime build up 1. Lubricate bearings
2. Bearings in head tube worn 2. Replace bearings
Controller Fault Codes
The controller used in Model 140T/140F includes internal diagnostics programming used to identify and troubleshoot
faults. When this diagnostics programming detects a fault, the LED status indicator on the dash flashes consecutively to
identify the fault. These consecutive flash codes correspond to a fault which are listed and described below.
LED Status Indicator Meaning and What To Do
1 (not used)
2 Battery Voltage Low. Check connections, and recharge batteries.
3 Battery Charge High. Unplug charger, turn scooter power on & off.
4 (not used)
5 Brake fault. Check Brake Release lever position and motor connections. Contact
authorized service facility.
6Out of Neutral at Power-Up. Engager not in neutral (centered) when keyswitch turned on.
Return lever to center and retry.
7 Speed Pot Error. Engager or wiring faulty or setup incorrectly. Contact authorized service
facility.
8Motor Voltage Error. Check all connections between controller and motor.
9Controller fault. Check all connections.
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rascal EM 140T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rascal EM 140T in the language / languages: English as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info