661012
20
Zoom out
Zoom in
Previous page
1/100
Next page
SAFETY, OPERATORS & MAINTENANCE MANUAL
GB-20
6 CONTROLS
A
B
C
A
B
C
6.1 THROTTLE CONTROL (A)
Move the throttle lever forward to increase the
engine speed which in turn engages the centrifugal
clutch thus driving the machine. The direction of
travel and blade engagement is determined by the
gearbox selection levers noted in 6.5 & 6.6
6.2 OPERATOR PRESENCE CONTROL (B)
Pushing the OPC down on the top handlebar allows
the operator to engage the transmission, forward /
reverse or mower. When any of these functions are
engaged releasing the OPC will stop the engine. The
OPC may be released and the engine continue to
run only if the transmission is disengaged
6.3 BRAKE (C)
The brake can be released when the operator is
ready to move the machine. The brake may be used
to slow the forward movement of the machine if nec-
essary but the engine speed should be reduced to
release the clutch or the OPC should be released to
stop the engine.
6.4 SERVICE BRAKE (C)
This should be applied when the operator moves
away from the operation position
6.5 FORWARD/REVERSE GEAR CHANGE (B)
To obtain forward drive the lever (B) should be
pushed to the left and then down from the neutral
position. It may be necessary to momentarily
increase the engine speed to ease the gear into
transmission.
For reverse drive the lever should be pushed to the
left and pulled upwards from the neutral position.
NOTE: It may be necessary to ‘blip’ the throttle to
allow the gear to engage.
6.6 CYLINDER DRIVE CLUTCH LEVER (A)
The clutch is engaged by pushing the lever (A) to the
right and then down. To disengage pull the lever
upwards and locate in slot at top of gate.
6.7 STARTER SWITCH (C)
This is turned clockwise to start the engine and anti-
clockwise to stop the engine.
B
A
C
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ransomes Mastiff 91 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ransomes Mastiff 91 in the language / languages: English, Dutch as an attachment in your email.

The manual is 5,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ransomes Mastiff 91

Ransomes Mastiff 91 User Manual - German - 122 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info