661013
49
Zoom out
Zoom in
Previous page
1/102
Next page
en-49
11 QUALITY OF CUT
11.8 RIFLING OR TRAMLINING ___________________________________________
11.9 MISMATCHED CUTTING UNITS _______________________________________
NOTE: Arrow indicates direction of travel.
Rifling or tramlining is a pattern of varying cutting
heights, resulting in a wave-like cut appearance,
usually due to heavy contact points across a reel
and/or bedknife.
Probable Cause Remedy
Reel and/or bedknife unevenly worn. Inspect bedknife and reel. Sharpen or replace reel
and bedknife as necessary.
Missing, loose, or over torqued bedknife screws. Install, replace or tighten bedknife screws to proper
torque setting.
Mowing (ground) speed is too fast. Reduce mowing (ground) speed.
NOTE: Arrow indicates direction of travel.
Mismatched cutting units is a pattern of varying cut-
ting heights, resulting in a stepped cut appearance,
usually due to mismatched HOC (height-of-cut) ad-
justment from one cutting unit to another.
Probable Cause Remedy
HOC inconsistent from one cutting unit to another. Check/adjust HOC on cutting units.
Difference in mower ride height side to side. Check/adjust tire inflation pressure.
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ransomes Hydraulic 5-7 mk4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ransomes Hydraulic 5-7 mk4 in the language / languages: English, Dutch as an attachment in your email.

The manual is 21,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info