661011
56
Zoom out
Zoom in
Previous page
1/228
Next page
en-54
OPERATION 7
7.8 MOWING _______________________________________________________
1. Lower the cutting unit with the joystick.
2. Ensure speed limiter is in mow position. (Cutting at a higher speed could be dangerous and may not give
the required finish.)
3. Engage the cutting mechanism by pushing on the lower half of cutting unit switch.
4. Release the parking brake and begin driving forward.
NOTE: Always set the throttle to full engine revs. for mowing, even when the grass is heavy. When the engine is
labouring, reduce forward speed by easing back on the FWD/REV foot pedal. A performance indicator lamp on
the control pod will illuminate red as the cutter deck starts to labour.
7.9 TO STOP THE ENGINE ____________________________________________
1. Disengage drive to the cutting units with the cutting unit switch.
2. Remove foot from the FWD/REV pedal.
3. Set the parking brake.
4. Move the throttle control lever to the SLOW position.
5. Turn the ignition key to OFF.
7.10 UNBLOCKING CUTTER DECKS ____________________________________
1. Switch off cutter deck, lift out of work and move machine to flat level ground.
2. Switch engine off and remove the ignition key.
3. Pivot deck see section 9.4.
4. Using a piece of wood and personal protective equipment e.g. eye protection and gloves, remove
blockage.
5. Check blades for damage and replace if necessary.
6. Put deck back into operating position see section 9.4.
7. Start engine and decks to check for correct operation.
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ransomes HR300 Kubota D1105T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ransomes HR300 Kubota D1105T in the language / languages: German as an attachment in your email.

The manual is 28,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ransomes HR300 Kubota D1105T

Ransomes HR300 Kubota D1105T User Manual - English - 114 pages

Ransomes HR300 Kubota D1105T User Manual - Dutch - 116 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info