Manual Ransomes Highway 3 (page 78 of 198) (English, Dutch)

661002

Zoom out

Zoom in

1/198

en-76

9 ADJUSTMENTS

9.9 GENERAL INSTRUCTIONS FOR GRAMMER SEATS ______________________

Adjustments must not be made while driving.

• After removal of the backrest upholstery, the backrest frame must be supported, for example held in place,

• before the backrest adjuster is operated. If you fail to do so, there is a danger that the backrest frame may jerk

forward and cause injury.

• Any changes to the series standard of the seat (for example fitting parts which are not original GRAMMER

parts) may impair the safety standard to which it has been tested.

• Functions may be impaired, threatening your safety. For this reason, any changes in design of the seat must

be approved by GRAMMER.

During the removal and installation of the driver’s seat, the corresponding instructions by

the specific vehicle manufacturer must be strictly observed!

• Do not hold onto the covers for lifting the driver’s seats. If you do so anyway, there is an increased risk of

injury due to loosening or breaking covers.

• Before you remove the driver’s seat, disconnect all plug-in connections between the seat and the vehicle

supply network. When you replace the plug-in connectors, make sure they are tight to avoid ingress of dust

and water.

• Seatbelts can be retrofitted to the driver’s seat. Seatbelts may only be fitted on the approval of the vehicle

manufacturer, as they increase the load in the seat mounting area.

• Seatbelts must be fitted in accordance with specific national regulations and guidelines, and must be

approved by GRAMMER.

• Retrofitted seatbelts must be fastened before driving.

• The seat belt must be replaced after an accident.

• Where seatbelts are fitted to the driver’s seat, the seat and seat mounting must be checked additionally by

specialist personnel after an accident has occurred.

• Fasteners must be, checked regularly for tight seat. If the seat wobbles there may be loose bolts or other

faults.

• If you notice that the seat does not function correctly (for example a defective seat suspension; improper

curvature of the lumbar support or damaged bellows), contact a specialist workshop immediately to arrange

for repairs to be carried out.

• If you fail to do so, your health may be affected and the risk of accident increased.

• Before the vehicle is used, switches that might be in the seat (for shutting down mechanical equipment when

the driver leaves his/her seat) must be checked for proper function

• If malfunctions are detected, the vehicle must not be driven. – INCREASED RISK OF ACCIDENT –

• Loads must not be placed on seats with a built in switch, except for the driver’s weight during normal use, as

the vehicle may otherwise start to move by itself. – INCREASED RISK OF ACCIDENT –

• If you take off the weight from the seat while driving, this will cause the vehicle to stop.

• Do not indent the bellows while there is load on the driver’s seat. – RISK OF CRUSHING –

• Make sure that the interior of drivers seat remains free of foreign particles or liquids.

• The driver’s seat is not watertight and must be protected against splashes of water!

• Any conversion or refitting work on a GRAMMER driver’s seat must be performed exclusively in authorised

workshops by trained or suitably qualified personnel and in adherence with the applicable operating,

maintenance and installation instructions and in compliance with all relevant national regulations.

• Improper installation and assembly bear the risk of personal injury or property damage and the proper function

of the driver’s seat or mounted parts can no longer be guaranteed.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ransomes Highway 3 in the language / languages: English, Dutch as an attachment in your email.

The manual is 27,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ransomes Highway 3 Manual

Product: