623533
19
Zoom out
Zoom in
Previous page
1/28
Next page
17
If, after these checks the dishwasher still does not function or
has any other error displayed, then press the ON-OFF button
to OFF. Wait a few minutes then turn the dishwasher back on
and try again.
When the program display displays FE’, F6’, F7’, ‘ F8’ or ‘F9
contact the nearest authorized service centre.
When contacting the nearest authorized service centre
provide them with the following information:
1. The nature of the problem (Error code).
2. The model number and serial number (S/N: ...), as
indicated on the plate located on the side of the inner
part of the door.
Lower spray arm rotates with diculty
• The spray arm is blocked by small items or food remains.
Lid in detergent compartment cannot be closed
• Detergent compartment has been overfilled.
• Mechanism is clogged with remnants of detergent.
Remnants of detergent stuck inside dispenser
• Compartment was damp when it was filled up with
detergent. Compartment must be dry before detergent
is added.
Water remains inside dishwasher after program has
ended
• Blockage or kind in drainage hose.
• Pump is jammed.
• Filters are blocked.
• The program is still running. Wait for the program to
end.
Problems During Washing
Unusual amount of foam
• Normal washing up liquid has been poured into the
rinse-aid container.
• Excess amount of rinse aid. Remove any spilled rinse
aid with a cloth as it could otherwise lead to excessive
foaming during the next washing cycle.
Dishwasher stops suddenly while washing is taking place
• Electricity supply to dishwasher has been cut off.
• Water supply has been interrupted.
Knocking sound can be heard while washing is taking
place
• A spray arm is knocking against the dishes inside the
dishwasher.
Rattling sound can be heard while washing is taking place
• Crockery has not been stacked properly inside the
dishwasher.
Knocking sound coming from inlet valves
• This is caused by the way the water pipes have been
laid and it has no effect upon the way the dishwasher
functions.
Problems With the Dishes, Cutlery, etc.
Remnants of food are stuck to the dishes, cutlery etc.
• Dishwasher was not loaded properly. Jets of water could
not reach all parts of the dishes, etc.
• Too many items in the rack.
• Items in the rack were touching each other.
• Not enough detergent was added to dispenser.
• Selected wash program was not intensive enough.
• Rotation of spray arm obstructed by dishes, etc.
• Nozzles in spray arm are blocked by remnants of food.
• Filters are blocked.
• Filters have been incorrectly fitted.
• Waste water pump is jammed.
Plastic items are discoloured
• Not enough detergent was added to dispenser.
• Detergent has insufficient bleaching properties. Use a
detergent containing a chemical bleaching agent.
White stains are left on crockery and glasses have a milky
appearance
• Not enough detergent added to the dispenser
compartment.
• Amount of rinse-aid set too low.
• Although water is quite hard, no salt has been put in
dishwasher.
• Water softener set too low.
• Lid on salt container not screwed tight.
• If you use a phosphate-free detergent, try a detergent
containing phosphates and compare results.
Dishes, cutlery, etc. have not been dried
• Selected program did not include drying function.
Amount of rinse-aid set too low.
• Items were removed from dishwasher too soon. For the
best drying performance, do not remove the contents
for at least 30 minutes. This allows residual heat in the
dishwasher to remove any small droplets of water that
may occur.
Glasses have a dull appearance
• Amount of rinse-aid set too low.
Tea stains or traces of lipstick have not been completely
removed
• Detergent does not have a sufficient bleaching effect.
• Washing temperature set too low.
Traces of rust on cutlery
• Cutlery is not rustproof.
• Salt content in washing water is too high.
• Lid on salt container not screwed tight.
• Salt spilt while filling container.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rangemaster RDW1045FI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rangemaster RDW1045FI in the language / languages: English as an attachment in your email.

The manual is 1,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info