623533
13
Zoom out
Zoom in
Previous page
1/28
Next page
11
Switching the Dishwasher OFF
Several minutes after the program has ended:
1. Open the door.
2. Set the ON-OFF button to OFF.
3. Remove dishes, etc. when they have cooled down.
Note: For the best drying performance, we recommend that
you do not remove the contents for at least 30 minutes. This
allows residual heat in the dishwasher to remove any small
droplets of water that may occur.
Interrupting the Program

CAUTION!
There is a risk of water coming out from inside the
dishwasher. DO NOT open the door fully until the
spray arm has stopped rotating.
If the dishwasher has already heated up or the hot water was
switched ON and then the dishwasher door opened, leave the
door ajar for several minutes and then close.
After 30 seconds the program will start from the point it was
interrupted. If the door is opened during the drying process
the program will be terminated.
Cancelling a Program

CAUTION!
There is a risk of water coming out from inside the
dishwasher. DO NOT open the door fully until the
spray arm has stopped rotating.
To cancel a program that is underway, carefully open
the door and press the program button and hold it in for
about 3 seconds. When the door is closed the water will be
discharged for about thirty seconds. Five beeps will indicate
that the program is cancelled; the end of program indicator
will turn on.
Modifying a Program

CAUTION!
There is a risk of water coming out from inside the
dishwasher. DO NOT open the door fully until the
spray arm has stopped rotating.
A cycle that is underway can be modied if it has only been
running for a short time. Otherwise, the detergent may have
already been used and the dishwasher may have already
drained the wash water. If this is the case, the detergent
dispenser must be relled (see ‘Loading the detergent’).
To modify a cycle that is already underway, open the door
and select a new program by pressing the program selection
button. Closing the door will start the new program from a
suitable point in the old program.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rangemaster RDW1045FI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rangemaster RDW1045FI in the language / languages: English as an attachment in your email.

The manual is 1,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info