623533

Rangemaster RDW1045FI Manual

6
Zoom out
Zoom in
Previous page
1/28
Next page
4
Salt
The hardness of water varies from place to place. If hard water
is used in the dishwasher, deposits will form on the dishes
and utensils.
The dishwasher is equipped with a special softener that uses
a salt specically designed to eliminate lime and minerals
from the water.
Please contact your local water authority to conrm the
hardness level of your water.
Adjusting Salt Consumption
The dishwasher is designed to adjust the amount of salt
consumed based on the hardness of the water used. This
is intended to optimize and customize the level of salt
consumption so that it remains at a minimum.
To adjust salt consumption:
1. With the dishwasher switched o press and hold the
program selection button (Fig.2-3).
2. Press the On/O button (Fig.2-4). Keep the program
selection button pressed until ‘SL’ disappears from the
program display.
3. The display will indicate the water hardness setting;
the dishwasher is supplied set to level 3. The hardness
level can be adjusted by pressing the program selection
button (Fig.2-3).
We recommend that the hardness level is set in accordance
with Table 2-1.
To save the setting press the On/O button.
Loading the Salt into the Container
Always use salt intended for use with dishwashers.
The salt container is located beneath the lower basket and
should be lled as follows:
4. When the low salt indicator (Fig.2-5) lights, you must
ll the salt container. Remove the lower rack and then
unscrew and remove the cap from the salt container.
Note: If you are lling the container for the rst time, ll
it with water.
5. Place the end of the funnel (supplied) into the hole
and introduce about 2 kg of salt. It is normal for a small
amount of water to come out of the salt container.
6. Carefully screw the cap back on.
IMPORTANT: To prevent the formation of rust, load the salt
just before beginning a wash cycle.
Low salt indicator
Table 2-1
Fig.2-5
Water Hardness
level
Hardness
dE
Hardness Level
Indicator
1 0 - 9 L1 shown in display
2 10 - 20 L2 shown in display
3 21 - 30 L3 shown in display
4 31 - 40 L4 shown in display
5 41 - 55 L5 shown in display
6 56 - 90 L6 shown in display
On/ O button
Program display
Program selection button
Fig.2-3
Fig.2-4
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rangemaster RDW1045FI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rangemaster RDW1045FI in the language / languages: English as an attachment in your email.

The manual is 1,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info