658407
20
Zoom out
Zoom in
Previous page
1/88
Next page
EN-20 Original User Guide | Impulse 2.0 Pedelec Version 3
3.7.1 Chain tension
Measuring chain tension
1. Remove the pedelec battery.
2. Press the chain up or down at its tautest point. The tension is correct if
you can move the chain up and down by about 5 mm.
3. Checkthechainatfourorvepointsoveracompleterevolutionofthe
crank.
Adjusting chain tension
1. Remove the pedelec battery.
2. Undo the rear wheel nuts.
3. If necessary remove the brake anchor.
4. Pull the rear wheel back in the drop-outs until the chain just has the
permissible amount of play.
5. Carefully tighten all bolts in a clockwise direction to a torque setting of
35 – 40 Nm. Make sure the wheel is reinstalled straight.
3.7 Chain
*
Bicycle chain
WARNING
Always remove the battery before starting to work on the pedelec. The
system could switch itself on unexpectedly and you could be seriously
injured.
CAUTION
Check the chain for signs of wear before every trip. A worn or
damaged chain can break. If that happens while you are riding the
bikeyoucouldbethrownoandseriouslyinjured.
*depending on model
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Raleigh Pedelec Impulse 2.0 - 2016 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Raleigh Pedelec Impulse 2.0 - 2016 in the language / languages: English as an attachment in your email.

The manual is 10,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Raleigh Pedelec Impulse 2.0 - 2016

Raleigh Pedelec Impulse 2.0 - 2016 User Manual - German - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info