658379

Raleigh BionX - 2011 Manual

37
Zoom out
Zoom in
Previous page
1/41
Next page
16
Troubleshooting
The system does not turn on
Check the battery and make sure that it is charged. The battery must be correctly inserted in the docking
station and the lock must be completely closed. Also check that all connectors of your wiring harness are
properly engaged. If the problem persists, contact your authorized dealer.
The system can be turned on but there is no assist
Check that the cables running from the battery to the motor are properly connected. If the problem per-
sists, contact your authorized dealer.
The system is continuously in generate mode
When the propulsion system is continuously in generate mode and cannot be switched back to assist
mode by pushing the
key, the problem most likely lies with the brake switches that are located at the
brake levers. In this case try to “repair” the system by turning it off and then on again. If that does not
solve the problem, you can temporarily bypass it by removing the plug-in connection from the console to
the brake-switch.
The motor is not as powerful after a repair or service
Tighten the nuts of the rear axle with the specified torque (40Nm/30lb-ft). If the problem is not solved
please contact your dealer.
The battery state of charge display on the console does not show “full” after a complete
charging procedure
Make sure that you have followed all of the instructions for the charging procedure. Let the battery cool
off for a few hours and then recharge it again. If the problem’s still not solved, let the battery cool again,
fully deplete the battery and charge it again. If the problem persists, contact your authorized dealer.
WARNING
If you bypass the brake switches you also disable regenerative breaking.
In doing so your system will not provide any brake support.
We recommend that you contact your dealer as soon as possible.
… 37 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Raleigh BionX - 2011 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Raleigh BionX - 2011 in the language / languages: English, German as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info