Manual Raleigh BionX - 2011 (page 33 of 41) (English, German)

658379

Zoom out

Zoom in

1/41

Programming the Basic Settings

In general, all basic settings for your electric bicycle are pre-set. If you happen to change tire sizes, during

service, for example, you can reset the tire circumference to ensure the precise function of your speedo -

meter. Furthermore, you can set the unit to display the speed, the strength of the recharge when triggering

one of the two brake levers and the arrangement of the main functions. This is done by

entering programming codes.

Turn on the programming mode

Simultaneously push and until the display shows “0000”. The ﬁ rst zero blinks. Change the value

of the selection with or and conﬁ rm with . Select the other digits in the same manner until the

desired program is displayed.

Code Description

2001 Select km/h or mph

2002 Regeneration/brake output (for magnetic switch) 0-40 (ideally 30-40)

2005 Tire circumference (millimeters)

2009 Flip Display Plus/Minus 0 = power left, 1 = power right

Code 2001 Code 2002

Select unit - km/h or mph. Select with

or and conﬁ rm with .

Default value: 30: adapt with

and

. Conﬁ rm with .

Code 2005 Code 2009

Set tire size (in mm) - Select digits

one after another with

or and

conﬁ rm with

Current setting of main functions is

displayed. Flip = 0, assist toggle is

the right side of console; Flip = 1,

assist

toggle is on the left side of console.

Conﬁ rm with

WARNING

Please do not use other programming codes without consulting your authorized dealer.

If you type the wrong code, please push key to exit programming mode.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Raleigh BionX - 2011 in the language / languages: English, German as an attachment in your email.

The manual is 1,18 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Raleigh BionX - 2011 Manual

Product: