779142

Raleigh 2020 Manual

206
Zoom out
Zoom in
Previous page
1/288
Next page
Pedelec/S-pedelecBasics
12
1.9 CE marking and declaration of conformity for pedelecs
The following paragraph is only applicable for Europe:
With the CE marking on the pedelec and the declaration of conformity, the manufacturer of
your pedelec confirms that the product meets all requirements* and other relevant provi-
sions in directives 2006/42/EC, 2014/30/EC and standards ISO 4210 and DIN EN 15194,
as well as other relevant directives and standards if applicable. You can find the declaration
of conformity enclosed with your pedelec.
*Status at the time of publication.
1.10 Function
The drive only assists with riding when you are also pedalling. The amount of assistance is
adjusted automatically according to the selected gear, depending on the system or model
installed, pedal force, load and speed:
– Depending on the design of your pedelec, the drive may assist up to a speed of
25 km/h (15.5 mph). The pushing aid can accelerate the cycle up to 6 km/h (4 mph)
depending on what gear the shifting system is in.
– Depending on the design of your S-pedelec, the drive may assist up to a speed of
45 km/h (28 mph). The starting aid can accelerate the cycle up to 18 km/h (11 mph)
depending on what gear the shifting system is in.
In terms of the maximum speed with pedal assistance, a tolerance of 10 % is permitted and
possible when riding.
1.11 Range
The drive is an auxiliary motor. To obtain the longest possible range, the following points
must be noted:
– The motor works most efficiently at a cadence of 50–80 crank revolutions/minute.
xShift to a lower or higher gear before inclines and descents to avoid excessively fast or
slow cadences.
xOperate the gear shifting system as if you were riding without assistance.
xUse the smaller gears in your gear shifting system on inclines, in headwinds and with
heavy loads.
– Starting in the lowest gear increases the range.
xAlways ride in a low gear and pedal as hard as possible.
xOn models with hub shifting systems, you can shift into 1stgear while stationary.
On models with derailleur shifting systems, you should shift into the lowest gear
while you are still stopped.
… 206 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Raleigh 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Raleigh 2020 in the language / languages: English as an attachment in your email.

The manual is 28.32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Raleigh 2020

Raleigh 2020 User Manual - German - 287 pages

Raleigh 2020 User Manual - Dutch - 286 pages

Raleigh 2020 User Manual - French - 294 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info