779142
176
Zoom out
Zoom in
Previous page
1/288
Next page
Cycle
Maintenance
152
5. If applicable, note the direction of travel and insert the new brake block holders. The
brake block holders will engage with an audible click.
6. Fit the wheel.
7. Put the previously removed side of the brake back on the brake mount and loosen the
retaining bolts for the brake piston clamps.
8. Carefully operate the brake lever and align the brake block holders parallel to the
rim so that the distance between the upper edge of the brake pads and the tyre is
2 mm/0.08".
9. Close the quick-release lever on the brake.
10. Operate the brake lever several times until the usual pressure point is reached.
14 .12.3.2 Adjusting brake block holder distances (Magura HS models)
The following describes how to adjust brake block holder distances, using the example of
a Magura HS.
The distance between the rim and brake block
holder is adjusted to 12 mm/0.04–0.08".
1. Loosen the pressure point adjustment
screw on the brake lever by turning it
anticlockwise. Ensure that you do not
unscrew it completely.
2. Turn the brake boss screw anticlockwise
until the brake boss can be moved.
3. Press the brake cylinders and brake block
holders against the rim.
4. Align the brake boss so that the brake
block holders are parallel to the rim and
the distance between the upper edge of
the brake pad and the tyre is 2 mm/0.08".
5. Carefully operate the brake lever so that
the brake boss does not slip.
6. Slowly release the brake lever until the
distance between one brake block holder
and the rim is 1–2 mm/0.04–0.08" (see
“Illustr.: Hydraulic rim brake”).
7. Hold or fix the brake lever in this position.
Illustr.: Hydraulic rim brake (example)
1 Brake boss screw
2 Distance between the rim and brake block
holder
3 Brake block holders
4 Brake cylinders
3
2
4
1
176


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Raleigh 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Raleigh 2020 in the language / languages: English as an attachment in your email.

The manual is 28.32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Raleigh 2020

Raleigh 2020 User Manual - German - 287 pages

Raleigh 2020 User Manual - Dutch - 286 pages

Raleigh 2020 User Manual - French - 294 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info