685843

RAINBIRD IMAGE SERIE - SOLID STATE CONTROLLER Manual

3
Zoom out
Zoom in
Previous page
1/3
Next page
B
CYC
CYC
VII - Manual cycle start.
A cycle consists of the sequential operation of all stations assigned to the same program.
Use A/B key to select the program.
Then press the +/ON key to start the cycle. The sprinkler stream will blink. The 1rst station number in the
program appears and the remaining water time for the stations is counted down. The rest of the stations
will appear in sequence. If the Water Budget function is used, the % icon will appear next to "A" or"B". The
increased or decreased watering time will also appear in the display.
To stop watering before the cycle is completed, press the -/OFF key. the controller will revert to the time of
day display.
Note : if the controller is in the OFF mode (a non-blinking cross on the sprinkler), no manual or automatic
watering will occur. See step VIII
VIII - System ON/Shutdown.
The default mode is "ON" wich allows programmed watering to take place.
You can prevent watering (rainy weather shutdown) without changing the scheduled watering programs
Call up the display with the blinking cross on the sprinklers. To prevent watering, press the -/OFF. The
cross stops blinking. If you move through the menu by pressing key, you will see that the non-
blinking cross appears in all the displays except one.
No watering, either automatic or manual, will take place. To return to the watering mode, press the
key until the blinking cross display appears.
Now press the +/ON key. The cross disappers.
ACTION AFTER POWER OUTAGE
If the LED is out, the LCD is blank. There is no 230 V power input. No irrigation will take place. However, the Image has
an electronic memory safeguard component that will maintain the irrigation programs for at least 24 hours. If the power
outage lasts longer, the programs are lost. A default program will cause each station to revert to program "A" and to
water for 10 minutes a day beginning 8 hours after power is restored. It is then necessary to reprogram the controller.
CERTIFICATE OF CONFORMITY TO EUROPEAN DIRECTIVES
I declare that the IMAGE device, an irrigation controller, conforms to the 72/23/CEE European Directives for electrical
safety and to 89/336/CEE and 93/31/CEE concerning electromagnetic compatibility.
The applicable standards in accordance with the technical file are :
EN 60065 for electrical safety.
EN 55022 class B for interference.
CEI 801-2 class 2, CEI 801-3 class 3, CEI 801-4 level 3 and CEI 801-5 class 4 for interference resistance.
The IMAGE type device is powered by 230 V~, 50 Hz, single phase.
Aix en Provence, 10/06/96
General Manager
RAIN BIRD EUROPE
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for RAINBIRD IMAGE SERIE - SOLID STATE CONTROLLER at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of RAINBIRD IMAGE SERIE - SOLID STATE CONTROLLER in the language / languages: English as an attachment in your email.

The manual is 0,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info