Manual Radson Confort Pilot (page 2 of 6) (English, Dutch, French)

500579

Zoom out

Zoom in

1/6

Note: if only the ‘frost outside’ indicator light [*]

is ashing, it means that the room temperature is

outside [i.e. higher or lower than] the calibrated zone

[18°C<calibrated zone <22°C]. Press the

button to

recalibrate the thermostat.

LIMITING FUNCTIONS

The following 2 functions may be useful in the case

of appliances installed in premises accessible to the

public.

Limiting thermostat

If you want to restrict the ambient temperature to a

predened level:

• Press the

button for at least 5 seconds.

The indicator light corresponding to the maximum

value allowed starts ashing. This value can be

increased by pressing the [+] or [-] button.

• To validate the new value, briey press the

button.

Deactiving the timer

If you want to lock the forced operation by 2hr timer:

• Press the

button and [-] simultaneously for at

least 5 seconds.

- The 2 hr indicator light starts ashing for 5

seconds to indicate it has taken the command

into account.

• To validate the new value, briey press the

button.

OPERATING RESERVE

Even if there is a power cut, the appliance keeps the

setting from before the cut in its memory, excepting

the function “Confort Pilot”.

RETURN TO FACTORY CONFIGURA-

TION

• Simultaneously press the [+] and [-] buttons for 10

seconds to return to the initial conguration:

- Adjustment mode setting Frost free or pilot

wire.

- No correction of measured temperature.

- Setting restriction, positioned on max tempera-

ture [26°C].

- Timer function unlocked.

- Removal of timer daily repetition.

SPECIFIC RECOMMENDATIONS

Mixed appliances

The mixed appliances are provided to operate with

2 different types of power: central heating/electric

heating. These 2 power types must never operate

simultaneously.

• When operating on central heating, the electric

part must be closed.

• If you want to operate the electric part, it is

advisable to close the tap mounted on the hot

water supply, but in this case, never totally isolate

the radiator [never shut the return of the cen-

tral heating circuit, in order to leave free passage

for dilation towards the expansion tank of the

installation].

• Never operate the electric part without having

checked that the radiator is full of water by purg-

ing the air out and adding water if necessary.

The purge must be carried out, either with pump

stopped, or supply tap closed.

Switching on without the appliance being properly

lled with water will result in the cancellation of the

guarantee.

Electric radiators

During use, you will be able to note that the top and

bottom elements are warmer than the rest of the

radiator:

• The top elements are not completely lled to allow

dilation of the heat transfer uid when heating.

• The bottom elements receive the return uid which

has transmitted its heat.

SPECIFIC CASE OF ADJUSTMENT BY

PILOT WIRE [BLACK WIRE]

The electronic thermostat allows the orders sent by

EDF [cf. Tariff Tempo] to be managed. It also allows

them to be viewed:

Orders generated by your programmer

1. Comfort: normal mode, the temperature set

point indicator light is on.

2. Reduced: temperature set point ashes.

3. Frost free: the 1st indicator light is on solidly.

4. Off: the heat indicator light [C] is on solid.

Orders generated by EDF

5. Comfort -1°C: the set point indicator light

ashes with single impulse.

6. Comfort -2°C: the set point indicator light

ashes with double impulse.

MAINTENANCE

Do not use chemically aggressive or abrasive

products. A cloth moistened with alcohol will be

suitable after having let the appliance cool down.

Preferably use a dry soft cloth for cleaning the casing.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Radson Confort Pilot in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 1,59 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Radson Confort Pilot Manual

Product: