Manual Radson 51055 - SLAVE RF (page 10 of 40) (English, German, Dutch, French)

500597

Zoom out

Zoom in

1/40

10. RF INITIALIZATION (Assign RF Thermostats to zones)

First of all to enter in the parameters menu, press 10 seconds on the (Ok) key, now press once on the (►) key to

display the “rF init” parameter, then press again on the (OK) key to enter in the “rf init” mode. The following

message must be appear:

- The number in front of the “init” text corresponds to the selected zone. (The corresponding LED on the MASTER

RF must be blink in green)

- Use (◄) & (►) keys to change the zone (01 to xx), the green LED blinking cursor move in a same way of the

zone number.

- With (OK) key you can select or de-select the zone(s) which must be learned with a thermostat. The

corresponding LED of the selected zone(s) must be shine in red to indicate that this zone(s) is in wait of thermostat

signal.

1. When you have correctly selected the zones which must be learned with a RF thermostat go to the thermostat

and activate the “rF init” mode. (See the corresponding leaflet of the RF thermostat to do this).

2. Now the thermostat will send the learning message to the MASTER-RF, Check the good reception on the

MASTER-RF display,

- Two squares scrolls on the graphic scope indicate a correct RFsignal.

- The LED previously selected (in RED) must now shine in green to indicate that the zones are correctly

configured with the thermostat.

- You can now switch off the thermostat to avoid perturbation during the installation of the other thermostats.

3. You could now repeat the step 1 to 3 to learn others thermostats. (don’t forgot to switch off the thermostat when

the learning is finished)

4. Only when you have finished the configuration of all thermostats with the MASTER-RF, you could assign the RF

main zone programmer. (See the RF main zone programmer leaflet for this).

5. - When the configuration between MASTER-RF and Main zone programmer RF has finished, the MASTER-

RF should exit the “rF init” mode.

Erase thermostat function:

With this function you could remove one or several thermostats of your installation.

Once on the “RF init” menu, choose the zone which must be removed with the blinking cursor and press 5 seconds

in the same time the (+) and (-) keys. Then the LED(s) of the zone(s) which worked with the thermostat will be

removed.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Radson 51055 - SLAVE RF in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,57 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Radson 51055 - SLAVE RF Manual

Product: