Manual Radson 51041 - Analog Basic RF (page 9 of 66) (English, German, Dutch, French, Polish)

500591

Zoom out

Zoom in

1/66

5 How to learn your RF thermostat with

the RF receiver

First of all, switch the button mode of the

thermostat in OFF position .

To learn (*) the RF thermostat with the receiver

you must put the receiver in “RF init” mode

(Please refer to the receiver leaflet).

Once, on the thermostat switch the button mode

on “Automatic” position .

o The thermostat will send now the RF signal to the

receiver. Check on the receiver the good

configuration.

o If the RF learning is not made correctly, check the

installation (antenna connection, supply voltage...)

o If the RF learning between the thermostat and the

receiver is good, put your thermostat in the off

mode .

o On the receiver you can exit the “RF init” mode or

configure another thermostat. (Please refer to the

receiver leaflet for this)

Now you can check the RF distance, go to the

room which must be regulated. Put your

thermostat on the final position (On the wall

support or on the table support), then put the

thermostat on the Automatic mode (setting

temperature 30°C). Close the door and go to the

receiver to check if the new status of the

thermostat has received.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Radson 51041 - Analog Basic RF in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 0,48 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Radson 51041 - Analog Basic RF

Radson 51041 - Analog Basic RF Installation Guide - English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish - 1 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Radson 51041 - Analog Basic RF Manual

Product: