500590
7
Zoom out
Zoom in
Previous page
1/40
Next page
7
Heat & Cool Input: (Free contact)
Open => The system will work in heat mode
Closed => The system will work in Cooling mode
Check the heat pump output before
connection.
6. Wiring Installation2: Reversible Heat pump (with external heat&cool signal)
DIP switch
Configuration
S1
B1 Cooling Output
B2 Heating Output
B3 Humidity
Drier
Heating and
cooling output :
ON
OFF
1
2
Managed by the
UFH digital
programmer in
accordance with the
heat pump signal.
On => only when
cooling demand from
minimum one zone
Managed by the
UFH digital
programmer in
accordance with the
heat pump signal.
On => only when
cooling demand from
minimum one zone
Managed by the
UFH digital
programmer and
the 10k sensor if
used
On => only when
humidity is detected.
UFH-DIGITAL
PROGRAMMER
Humidity sensor: (10k sensor)
Must be mounted on the incoming
water pipe of the manifold with
precautions.
UFH digital main
programmer zone
4 actuators max
DIP switch
Configuration S2
P1
Humidity Level
P2 Humidity
Detection Time
Humidity
sensor :
On : if used
Off : if not used
ON
OFF
1
2
5 to 25 °C
Setting level to
stop the cooling
output and start
the humidity drier.
5 to 60min
Minimum time for
humidity
temperature
detection
A B 1 HC Sen 2 4
NC
24Vac
B1 B2 B3
P1
P2
NC
24Vac
NC
24Vac
NC
24Vac
S1
L N
HUMIDITY
DRIER
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Radson 51035 - H-C module 24V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Radson 51035 - H-C module 24V in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 0,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info