569967

RadioShack Realistic PRO-2050 Manual

20
Zoom out
Zoom in
Previous page
1/56
Next page
20
quency into the channel. The
scanner stores the frequency.
• s or t to stop searching so you
can listen to the transmission.
HOLD
appears.
To release hold and continue
searching, press
SEARCH
.
Notes:
• To step through the frequencies
while
HOLD
appears, press s or t.
• If you tune to a search skip fre-
quency,
L/O
appears. See “Lock-
ing Out Channels and Fre-
quencies” on Page 23.
• To skip data signals (such as
modem signals), press
DATA
. See
“Skipping Data Signals” on
Page 23.
SCANNING THE STORED
CHANNELS
To begin scanning channels, press
SCAN
. The scanner scans through all
non-locked channels in all banks that
are turned on, then stops on the first
transmission it finds. When the trans-
mission ends, the scanner resumes
scanning.
Notes:
• Channels with no frequencies are
automatically locked out during
scanning.
• To scan in the trunk tracking
mode, see “Scanning a Trunked
Bank” on Page 27.
MANUALLY SELECTING
A CHANNEL
You can continuously monitor a single
channel without scanning. This is use-
ful if you hear an emergency broad-
cast on a channel and do not want to
miss any details — even though there
might be periods of silence — or if you
want to monitor a specific channel.
Follow these steps to manually select
a channel.
1. Press
MANUAL
.
2. Enter the channel number.
3. Press
MANUAL
again.
Or, if your scanner is scanning and
stops at the desired channel, press
MANUAL
one time. (Pressing
MANUAL
additional times causes your scanner
to step through the channels.)
To resume scanning, press
SCAN
.
CLEARING A
FREQUENCY FROM A
CHANNEL
1. Press
MANUAL
.
2. Use the number keys to enter the
channel number containing the
frequency you want to delete.
Then press
MANUAL
again.
3. Press
0
, then press
E
. The fre-
quency is deleted.
20-430.fm Page 20 Wednesday, August 4, 1999 1:29 PM
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for RadioShack Realistic PRO-2050 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of RadioShack Realistic PRO-2050 in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info