569967

RadioShack Realistic PRO-2050 Manual

9
Zoom out
Zoom in
Previous page
1/56
Next page
9
• The antenna should be as high as
possible on the vehicle or building.
• The antenna and its cable should
be as far as possible from sources
of electrical noise (appliances,
other radios, etc.).
• The antenna should be vertical for
the best performance.
To connect an optional base-station or
mobile antenna, first remove the sup-
plied antenna from the scanner. Al-
ways use 50-ohm coaxial cable, such
as RG-58 or RG-8, to connect the
base-station or mobile antenna. For
lengths over 50 feet, use RG-8 low-
loss dielectric coaxial cable. If the an-
tenna cable’s connector does not fit in
the
ANT.
jack, you might also need a
Motorola-to-BNC antenna plug adapt-
er, such as RadioShack Cat. No. 278-
117. Your local RadioShack store car-
ries a wide variety of coaxial antenna
cable and connectors.
Once you choose an antenna, follow
the mounting instructions supplied
with the antenna. Then route the an-
tenna’s cable to the scanner and con-
nect the cable to the
ANT.
jack on the
back of the scanner.
DC 12V
ANT
Cautions:
• Do not run the cable over sharp
edges or moving parts that might
damage it.
• Do not run the cable next to power
cables or other antenna cables.
Warnin
g
:
Use extreme caution
when you install or remove an out-
door antenna. If the antenna starts
to fall, let it go! It could contact
overhead power lines. If the anten-
na touches a power line, contact
with the antenna, mast, cable, or
guy wires can cause electrocution
and death. Call the power compa-
ny to remove the antenna. DO
NOT attempt to do so yourself.
CONNECTING POWER
Using AC Power
The scanner’s supplied AC adapter
lets you power the scanner from a
standard AC outlet. To connect power
to the scanner, insert the AC adapter’s
barrel plug into the
DC 12V
jack on the
back of the scanner, then plug the AC
adapter into a standard AC outlet.
ANT
20-430.fm Page 9 Wednesday, August 4, 1999 1:29 PM
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for RadioShack Realistic PRO-2050 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of RadioShack Realistic PRO-2050 in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info