569998

RadioShack Pro 99 - de Luxe Manual

34
Zoom out
Zoom in
Previous page
1/76
Next page
34
INITIALIZING THE
SCANNER
If you want to clear all the
scanner’s memory, initialize the
scanner.!
1. Press and hold FUNC for
about 2 seconds.
2. Press
8, 5, and then ENT.
Do not turn off the scanner
until the initialization is
complete.
SCANNING
CHANNELS
1. Set the scanner to the
conventional channel mode
so MAN, Bank, and a frequency
appear by pressing
FUNC
then
CAR.
2. Turn
SQ fully
counterclockwise and adjust
VOL to a comfortable level.
3. Turn SQ clockwise until the
rushing sound stops.
To begin scanning channels or to
start scanning again after
monitoring a specific channel,
press
SCAN.Ô
To change the scanning direction,
press
^
or v while scanning.
To restart scanning while the
scanner is in stop mode, press
^
or
v
.
The scanner scans through all
channels (except those you have
locked out) in the active channel
storage banks (see “Turning
!
IMPORTANT
!
Initializing the scanner
clears all information
you stored in the
scanner’s memory.
Initialize the scanner
only when you are sure
.
Ô NOTES Ô
• The scanner will not
enter scan mode if
there are no
frequencies stored in
channels, or if all
channels are locked
out in the channel
storage bank(s) that
you are attempting to
scan. In either of
these cases, the
scanner will display
All channels Locked out!.
See “Storing
Frequencies Into
Channels” on
Page 30
• If SQ is adjusted so
you always hear a
rushing sound, the
scanner will not scan
properly. Rotate the
SQ control until the
rushing sound stops.
• If SQ is adjusted
precisely at the
threshold where the
rushing sound stops,
the radio will be most
sensitive to very
weak signals. The
radio may also
receive unwanted
noise or signals that
are too weak to
understand. Most
users prefer to
position the SQ
control a little bit past
the point of threshold
to avoid receiving
noise or signals that
are too weak to
understand.
20-515Change01_04.fm Page 34 Friday, January 16, 2004 1:14 PM
… 34 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for RadioShack Pro 99 - de Luxe at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of RadioShack Pro 99 - de Luxe in the language / languages: English as an attachment in your email.

The manual is 1,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info