569965
108
Zoom out
Zoom in
Previous page
1/124
Next page
108
RESETTING /
I
NITIALIZING THE
SCANNER
If the scanner’s display locks up or
does not work properly after you
connect a power source, you
might need to reset or initialize it.
!
Resetting the Scanner
1. Turn off the scanner, then turn
it on again.
2. Insert a pointed object, such
as a straightened paper clip,
into the reset opening on the
side of the scanner. Then
gently press and release the
reset button inside the
opening.
Ô
Initializing the Scanner
.
1. Turn off the scanner, then turn
it on again.
!
The scanner
briefly displays the DSP boot
version, and then
Welcome To
Digital Trunking
appears.Ô
2. Press 0. The scanner
displays:
The scanner
does not
receive digital
transmissions
on digital
frequencies or
trunking
systems
The digital channel
or talkgroup is not
using APCO-25
digital modulation
The scanner can only
receiveAPCO-25C4FM
IMBE digital signals.
The digital channel
or talkgroup is
encrypted
The scanner will not
receive encrypted
traffic.
The digital channel
or talkgroup is
being transmitted
from a distant
location
Reposition the scanner
or use an outdoor
antenna to improve
reception.
Problem Possible Caus Remedy
!
IMPORTANT
!
Ifyouhaveproblems
with the scanner, first try
to reset it to retain all
memory. If that does not
work, you can initialize
the scanner.
You may be able to save
the information in your
scanner’s memory into
your computer, a V-
Scanner folder or
another scanner before
trying to initialize it. See
“Cloning the
Programmed Data” on
Page 82 and “Working
with V-Scanners” on
Page 75.
Initialilzing the Scanner
clears all information
youstoredinthe
scanner’s working
memory. Initialize the
scanner only when you
are sure the scanner is
not working properly. V-
Scanner memory is not
affected when the
scanner is initialized.
108


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for RadioShack PRO-96 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of RadioShack PRO-96 in the language / languages: English as an attachment in your email.

The manual is 0,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info