569965
23
Zoom out
Zoom in
Previous page
1/124
Next page
23
SS=Subfleet ID
Type I systems are usually
organized with different user
groups assigned to different
fleets.
Ô
To properly map the raw Type I
data to the correct fleet-subfleet
format, you must program the
correct fleet map into the scanner.
Fleet map information is widely
available on the Internet for most
Type I systems in use.
Type II and APCO-25 system
talkgroups are identified by a 5-
digit number. Valid Type II
talkgroup IDs are divisible by 16,
while APCO-25 talkgroups are not.
Use care to ensure that you enter
the correct Type II IDs into your
scanner. Type I/II hybrid systems
use both fleet-subfleet and 5-digit
formats for talkgroup IDs.
EDACS Trunking Mode
(ED)
You can set your scanner so it
decodes the talkgroup IDs used
with EDACS (GE/Ericsson/M/A-
COM) trunking systems. This
setting is called the EDACS mode.
EDACS systems are used
primarily by business or private
communications service providers,
as well as by some public safety
organizations. EDACS systems
transmit active talkgroup
information only on a dedicated
control channel.
EDACS frequencies are organized
in a specific order. Each frequency
is assigned a Logical Channel
Ô NOTES Ô
For example, a valid
fleet-subfleet ID
identifying all
detectives within a
police department
might be 000-12,
where 000 identifies
all police users and
12 identifies the
Detective division.
Tuning the scanner
to an active control
channel while in
Motorola mode will
display the Motorola
System ID and the
approximate control
channel message
decode success rate.
This information can
help you identify the
Motorola trunking
system that you are
monitoring and the
quality of the control
channel signal.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for RadioShack PRO-96 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of RadioShack PRO-96 in the language / languages: English as an attachment in your email.

The manual is 0,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info