569964

RadioShack PRO-95 Dual Trunk-Tracking Manual

56
Zoom out
Zoom in
Previous page
1/92
Next page
Trunking
56
specific frequency to transmit on,
a trunked system chooses one of
several frequencies when the
2-way radio user transmits. The
system automatically transmits the
call on that frequency, and also
sends a code that identifies that
2-way radio user's transmission on
a control channel.
Your scanner lets you easily hear
both the call and response
transmissions for that 2-way radio
user and therefore follow the
conversation. For EDACS and
Motorola (above 406 MHz range),
the scanner monitors the control
channel between each
transmission to identify talk groups.
SETTING SQUELCH FOR
THE TRUNKING MODE
Your scanner automatically mutes
the audio during trunk scanning
when it decodes control channel
data. However, we recommend
you turn
SQUELCH clockwise and
leave it set to a point just after the
hissing sound stops. This lets the
scanner quickly acquire the data
channel.
PROGRAMMING
T
RUNKING FREQUENCIES
You program trunking frequencies
the same as non-trunked
frequencies, except that you must
store the appropriate mode (MOT
or ED) with each frequency.
Ô
Follow these steps to program
trunked frequencies:
Ô NOTE Ô
• You can scan only
one type of
trunkedfrequency
,
either EDACS or
Motorola in a bank
at one time. You
can, however, mix
conventional
channels and
frequencies in a
bank.
• If you are
programming
trunked
frequencies for
Motorola Type I
and hybrid
systems, you must
first program the
fleet map (see
“Programming
Fleet Maps” on
Page 60).
• If you are
programming
frequencies for an
EDACS system
you must store
them in the
Logical Channel
Number order
(usually listed as
LCN#). For
example, LCN1
would go into
channel 01 for the
current bank, and
LCN2 would go
into channel 02.
… 56 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for RadioShack PRO-95 Dual Trunk-Tracking at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of RadioShack PRO-95 Dual Trunk-Tracking in the language / languages: English as an attachment in your email.

The manual is 1,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info