569964
38
Zoom out
Zoom in
Previous page
1/92
Next page
Operation
38
blinks
L on the second line for
the lower-end limit frequency.
3. Use the number keys and
./DELAY to enter the desired
lower-end limit frequency
(including the decimal point).
4. Press
ENTER to set the
frequency. The cursor moves
to
H. If the entered frequency
is incorrect,
Invalid Freq briefly
appears.
5. Enter your desired higher-end
frequency and press
ENTER.
6. Rotate
SQUELCH clockwise
and leave it set to a point just
after the hissing sound stops.
7. Press
SEARCH to start
searching. When the scanner
finds an active frequency, it
stops searching.
Ô
You can set Zeromatic on or off by
pressing
FUNC then 0.PressFUNC
then 0 again to reverse the
Zeromatic setting. Whenever this
feature is turned on,
Zeromatic ON
briefly appears then z appears at
the first digit of the second line and
the scanner stops at the correct
frequency. When you turn this
feature off,
z disappears and the
scanner stops when it detects an
active signal. Zeromatic functions
only in search banks 2, 3, 4 and 5.
There are several group banks in
SR2 Police/Fire and SR4 ham
bands. You can turn off or on the
groups by pressing the group
numbers. For example to turn off
0,press0.
Ô NOTE Ô
You can copy and
save a frequency
into a specified
bank, channel, or
priority channel
when the scanner
finds an active
frequency. See
“Using Frequency
Copy” on Page 41
to save the
frequency. The
frequency copy
works only in
search banks 2, 3,
4 and 5.
While the scanner
is searching, you
can use the seek
search by press-
ing FUNC then 7.
Seek ON appears
on the bottom line.
The scanner stops
at an active
frequency for five
seconds and
restarts searching
automatically. The
scanner repeats
this operation.
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for RadioShack PRO-95 Dual Trunk-Tracking at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of RadioShack PRO-95 Dual Trunk-Tracking in the language / languages: English as an attachment in your email.

The manual is 1,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info