569958

RadioShack PRO-94 - 1000-Channel Manual

51
Zoom out
Zoom in
Previous page
1/72
Next page
51
Trunking Operation
served for storing lists (see “Using Talk Group ID Lists”
on Page 48) can have only one priority ID, and the ID as-
signed that priority in List 1 has the highest priority of all.
To assign a priority to an ID, press
PROG
. Enter the de-
sired ID number (list number and location number), then
press
PRIORITY (H/S)
.
P
appears.
To turn priority ID scanning on or off, repeatedly press
PRIORITY (H/S)
during ID scanning or manual operation.
PRI
appears when priority scanning is turned on.
Note:
Priority ID scanning does not operate when priori-
ty IDs are locked out. See “Locking Out Talk Group IDs”
on Page 45.
SCANNING TYPE I AND HYBRID
TRUNKED SYSTEMS
Your scanner is preset to scan Type II system IDs. When
you scan trunked frequencies, each Type II user ID you
see appears as an even number without a dash (exam-
ple 2160). Your scanner can also scan Type I trunked
systems. Each Type I ID appears as a three- or four-digit
number, followed by a hyphen, followed by a one- or
two-digit number (example 200-14).
If you notice a mix of odd- and even-user IDs (examples
6477, 2160, 6481, 6144, and 1167), then you are proba-
bly monitoring either a Type I or hybrid (a combination of
Type I and Type II user IDs) system with the S-Bit func-
tion turned off (see “Types of Trunking Systems” on
Page 38 and “Turning the Status Bit Ignore (S-Bit)
On or Off” on Page 43).
Subfleet information is included with the frequency list
for a Type I system. To enter the provided map, see
“Programming a Fleet Map” on Page 55.
Note:
To locate suitable fleet map information, review
the contents of website
www.trunkscanner.com
.
If you do not already know the size codes used, you will
have to guess. Since you do not have to figure out all the
blocks at one time, this is not as hard as it might seem.
20-524A.fm Page 51 Tuesday, June 27, 2000 3:41 PM
… 51 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for RadioShack PRO-94 - 1000-Channel at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of RadioShack PRO-94 - 1000-Channel in the language / languages: English as an attachment in your email.

The manual is 1,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info