569958
30
Zoom out
Zoom in
Previous page
1/72
Next page
30 Operation
5. Repeat Steps 2–4 to store the remaining monitor
memory frequencies into channels, as necessary.
SCANNING THE STORED CHANNELS
To begin scanning channels, press
SCAN
. The scanner
scans through all non-locked channels in the activated
banks. (See “Locking Out Channels” on Page 32 and
“Turning Channel-Storage Banks On and Off” on
Page 31). When the scanner finds a transmission, it
stops on it. When the transmission ends, the scanner re-
sumes scanning.
Notes:
If you have not stored frequencies into any chan-
nels, the scanner does not scan.
If the scanner picks up unwanted partial, or very
weak transmissions, turn
SQUELCH
clockwise to
decrease the scanner’s sensitivity to these signals.
To listen to a weak or distant station, turn
SQUELCH
counterclockwise.
To ensure proper scanning, adjust
SQUELCH
until
the audio mutes.
To scan in the trunk scanning mode, see “Trunking
Operation” on Page 38.
MANUALLY SELECTING A CHANNEL
You can continuously monitor a single channel without
scanning. This is useful if you hear an emergency broad-
cast on a channel and do not want to miss any details —
even though there might be periods of silence — or if
you want to monitor a specific channel.
To manually select a channel, press
MAN
, enter the
channel number then press
MAN
again.
Or, during scanning, if the radio stops at a channel you
want to listen to, press
MAN
one time. (Repeatedly
pressing
MAN
at this time causes the scanner to step
through the channels.) Press
SCAN
to resume automatic
scanning.
20-524A.fm Page 30 Tuesday, June 27, 2000 3:41 PM
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for RadioShack PRO-94 - 1000-Channel at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of RadioShack PRO-94 - 1000-Channel in the language / languages: English as an attachment in your email.

The manual is 1,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info