Manual RadioShack PRO-94 - 1000-Channel (page 14 of 72) (English)

569958

Zoom out

Zoom in

1/72

14 Preparation

scanner and recharges the installed batteries at the

same time.

USING VEHICLE BATTERY POWER

You can power the scanner from a vehicle’s 12V power

source (such as cigarette-lighter socket) using a 9V, 300

mA DC adapter and a size H Adaptaplug (neither sup-

plied). Both are available at your local RadioShack store.

Cautions:

You must use a power source that sup-

plies 9V DC and delivers at least 300 mA.

Its center tip must be set to negative and

its plug must fit the scanner’s

POWER 9V 300MA

jack. Using an adapter that does not meet these

specifications could damage the scanner or the

adapter.

• Always connect the DC adapter to the scanner

before you connect it to the power source. When

you finish, disconnect the adapter from the power

source before you disconnect it from the scanner.

• If batteries are installed, make sure the battery

switch inside the battery compartment is set to the

correct position (see “Using Internal Batteries” on

Page 10).

1. Turn

VOLUME/OFF

counterclockwise until it clicks to

make sure the power is turned off.

2. If the adapter has a voltage switch, set the switch to

9V.

3. Insert the Adaptaplug into the DC adapter’s cord so

it reads TIP

–.

Insert the Adaptaplug into the scan-

ner’s

POWER 9V 300MA

jack.

4. Plug the other end of the adapter into your vehicle’s

cigarette-lighter socket.

If rechargeable batteries are installed and

ALKALINE

JACK NI-CD

is set to

NI-CD

, the adapter powers the

scanner and recharges the installed batteries at the

same time.

20-524A.fm Page 14 Tuesday, June 27, 2000 3:41 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of RadioShack PRO-94 - 1000-Channel in the language / languages: English as an attachment in your email.

The manual is 1,69 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

RadioShack PRO-94 - 1000-Channel Manual

Product: