Manual RadioShack PRO-90 - 300 Channel (page 50 of 64) (English)

569997

Zoom out

Zoom in

1/64

6. Repeatedly press s or t to select the size code for

the first block, then press

.- The next available

block appears.

7. Repeat Step 6 until you have selected a size code

for each block you want to work with.

8. Press

SRCH

. The scanner exits the trunking pro-

gramming mode, tunes the data channel, then

begins to search using the map you programmed.

Note:

If you select size code S-12, S-13, or S-14, these re-

strictions apply:

• S-12 can only be assigned to Blocks 0, 2, 4, or 6.

• S-13 can only be assigned to Blocks 0 and 4.

• S-14 can only be assigned to Block 0.

Since these size codes require multiple blocks, you will

be prompted for the next available block when program-

ming a fleet map. For example, if you assign Block 0 as

an S-12, the scanner prompts you for

, the next block

available, instead of b1. And if you assign Block 0 as an

S-14, you would not see another prompt because it uses

all available blocks.

Programming a Hybrid System

A hybrid system is simply a Type I system with some of

its blocks designated as Type II blocks. To program a

hybrid system, follow the steps listed in “Programming a

Fleet Map” on Page 49. However, if you want a block to

be Type II, select size code

S-0

in Step 6.

20-520.fm Page 50 Wednesday, August 4, 1999 3:06 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of RadioShack PRO-90 - 300 Channel in the language / languages: English as an attachment in your email.

The manual is 1,06 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

RadioShack PRO-90 - 300 Channel Manual

Product: