Manual RadioShack PRO-90 - 300 Channel (page 46 of 64) (English)

569997

Zoom out

Zoom in

1/64

systems, you must select or program a fleet map with

the same size code assignments as the trunked system.

If you do this accurately, you will track all the fleet and

subfleet combinations used by the system. In other

words, you will hear complete communications while

monitoring a trunked system.

Note: Preset fleet maps might be available at

www.trunkscanner.com

If you do not already know the size codes used, you will

have to guess them. But since you do not have to figure

out all the blocks at once, this is not as hard as it seems.

Select a size code for a block, then press

SRCH

. Now lis-

ten to the communications. If you decide you are receiv-

ing most of the replies to the conversations with IDs

assigned to the block you just programmed, then you

have probably selected the right size code and can work

on the next block of the map.

There are 16 preset fleet maps to choose from, and it is

best to start with these when setting up a Type I or hy-

brid trunk tracking bank. If none of the following preset

fleet maps allow you to follow complete conversations,

then you probably need to program your own fleet map

(see “Programming a Fleet Map” on Page 49).

E1P1 E1P2 E1P3

Block Size

Code

Block Size

Code

Block Size

Code

0S110S40S4

1S111S41S4

2S112S42S4

3S113S43S4

4S114S44S4

5S115S45S4

6S116S46S12

7S117S47---

E1P4 E1P5 E1P6

Block Size

Code

Block Size

Code

Block Size

Code

0S120S40S3

20-520.fm Page 46 Wednesday, August 4, 1999 3:06 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of RadioShack PRO-90 - 300 Channel in the language / languages: English as an attachment in your email.

The manual is 1,06 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

RadioShack PRO-90 - 300 Channel Manual

Product: