569997
9
Zoom out
Zoom in
Previous page
1/64
Next page
9
1. Press down on the battery compartment cover and
slide the cover in the direction of the arrow to
remove it.
2. Disconnect the battery pack’s connector from the
scanner’s connector. Then remove the battery pack
from the battery compartment.
3. Attach the new battery pack's connector to the bat-
tery socket inside the battery compartment. Then
put the battery pack into the compartment.
4. Replace the cover.
When the scanner’s battery gets low, blinks and
the scanner beeps about every 15 seconds.
Important: At the end of a rechargeable battery pack's
useful life, it must be recycled or disposed of properly.
Contact your local, county, or state hazardous waste
management authorities for information on recycling or
disposal programs in your area. Some options that might
be available are: municipal curb-side collection, drop-off
boxes at retailers such as your local RadioShack store,
recycling collection centers, and mailback programs.
Using Standard AC Power
To power the scanner from AC power, use the supplied
AC adapter/charger. Plug the adapter/charger's barrel
plug into the scanner's
EXT. PWR
jack. Then plug the AC
adapter/charger's power module into a standard AC out-
let.
20-520.fm Page 9 Wednesday, August 4, 1999 3:06 PM
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for RadioShack PRO-90 - 300 Channel at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of RadioShack PRO-90 - 300 Channel in the language / languages: English as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info