Manual RadioShack PRO-89 - 200 Channel (page 7 of 68) (English)

569999

Zoom out

Zoom in

1/68

Preparation

When flashes on the display

and the scanner beeps, or if the

scanner stops operating properly,

replace the batteries.

USING AC POWER

You can power the scanner using

a 9V, 300-mA AC adapter and a

size B Adaptaplug adapter

(neither supplied). Both are

available at your local RadioShack

store.

Cautions:

•You must use a

Class 2 power

source that supplies

9V DC and delivers at least

300 mA. Its center tip must be

settopositiveanditsplug

must fit the scanner's PWR

DC 9V jack. Using an adapter

that does not meet these

specifications could damage

the scanner or the adapter.

• Always connect the AC

adapter to the scanner before

you connect it to AC power.

When you finish, disconnect

the adapter from AC power

before you disconnect it from

the scanner.

To power the scanner using an AC

adapter, attach the Adaptaplug to

the AC adapter so the tip reads

positive (+), then insert the

Adaptaplug into the scanner’s

PWRDC9Vjack. Connect the

other end of the adapter to a

standard AC outlet.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of RadioShack PRO-89 - 200 Channel in the language / languages: English as an attachment in your email.

The manual is 0,46 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

RadioShack PRO-89 - 200 Channel Manual

Product: