Manual RadioShack PRO-82 - 200 Channel (page 39 of 56) (English)

570014

Zoom out

Zoom in

1/56

Special Features

2. Insert a pointed object, such

as a straightened paper clip,

into the reset opening on the

side of the scanner. Then

gently press the reset button

inside the opening.

+0+6+#.+<+0)"6*'"5%#00'4"

1. Turn off the scanner, then turn

it on again.

2. Hold down

TUNE/CLEAR

3. While holding down

TUNE/

CLEAR

, insert a pointed object

(such as a straightened paper

clip) into the reset opening on

the side of the scanner, then

gently press the reset button

inside the opening. The

display should turn off.

4. When the display turns on

again, release

TUNE/CLEAR

9KTGF"2TQITCOOKPI

You can transfer programming

data to your scanner using your

home computer and an optional

scanner PC programming kit (Cat.

No. 20-048, available at your local

RadioShack store). The

programming kit includes a CD-

ROM with the software you need

and a connecting cable.

1. Make sure your scanner is

turned off.

2. Follow the steps provided with

the programming kit to

connect the cable to your

computer and load the

software into your computer,

"016'"

Resetting the

Scanner

If the scanner still does

not work properly, you

might need to initialize

the scanner (see

“Initializing the

Scanner”).

Initializing the

Scanner

You must release the

reset button before

releasing

TUNE/

CLEAR

; otherwise

the memory might not

clear.

Wired

Programming

• If the scanner

receives no data

from the PC for

more than 20

seconds or if you

press any key,

wired program-

ming stops.

• Wired program-

ming stops if the

scanner receives

an empty channel

number.

"+/2146#06"

This procedure

clears all information

you stored in the

scanner's memory.

Initialize the scanner

only when you are

sure the scanner is

not working properly.

20-315.fm Page 39 Wednesday, July 24, 2002 2:27 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of RadioShack PRO-82 - 200 Channel in the language / languages: English as an attachment in your email.

The manual is 5,09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

RadioShack PRO-82 - 200 Channel Manual

Product: