570016
12
Zoom out
Zoom in
Previous page
1/48
Next page
12
USING VEHICLE
BATTERY POWER
You can power the scanner
from a vehicle’s 12V power
source (such as cigarette-
lighter socket) using a 9V,
300-mA DC adapter and a
size H Adaptaplug adapter
(neither supplied). Both are
available at your local Ra-
dioShack store.
Cautions:
You must use a
power source
that supplies
regulated 9V DC and
delivers at least 300 mA.
Its center tip must be set
to positive and its plug
must fit the scanner's
POWER
jack. Using an
adapter that does not
meet these specifica-
tions could damage the
scanner or the adapter.
Always connect the DC
adapter to the scanner
before you connect it to
the power source. When
you finish, disconnect
the adapter from the
power source before you
disconnect it from the
scanner.
To power the scanner using
a DC adapter, attach the
Adaptaplug adapter to the
DC adapter so the tip reads
positive (+). Set the adapt-
er’s voltage switch to 9V and
insert the Adaptaplug adapt-
er into the scanner’s
POWER
jack, then plug the DC
adapter into your vehicle’s
cigarette lighter socket.
Note:
If you use a cigarette
lighter power cable and your
vehicle’s engine is running,
you might hear electrical
noise from the engine while
scanning. This is normal.
CHARGING
RECHARGEABLE
BATTERIES
Your scanner has a built-in
charging circuit that lets you
charge Ni-Cd rechargeable
batteries while they are in
the scanner.
Important:
The scanner’s
built-in charging circuit takes
a long time to recharge
nickel-metal hydride batter-
ies while they are installed in
the scanner. You must use
an external battery charger
to charge them.
!
20-313.fm Page 12 Friday, January 7, 2000 3:09 PM
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for RadioShack PRO-76 - 200 Channel at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of RadioShack PRO-76 - 200 Channel in the language / languages: English as an attachment in your email.

The manual is 1,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info