Manual RadioShack PRO-72 - 50 Channel (page 50 of 56) (English)

569959

Zoom out

Zoom in

1/56

RESETTING/INITIALIZING THE

SCANNER

If the scanner’s display locks up or does not work properly

after you connect a power source, you might need to reset

or initialize it.

Important:

If you have problems, first try to reset the

scanner. If that does not work, you can initialize the scan-

ner; however, initializing clears all frequencies you stored

in the scanner’s memory and initializes the scanner to its

default settings.

Resetting the Scanner

1. Turn off the scanner, then turn it on again.

2. Insert a pointed object, such as a straightened paper

clip, into the reset hole on the side of the scanner.

Then gently press and release the reset button

inside the opening. The display goes blank, then

information reappears.

20-566.fm Page 50 Thursday, August 5, 1999 8:04 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of RadioShack PRO-72 - 50 Channel in the language / languages: English as an attachment in your email.

The manual is 0,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

RadioShack PRO-72 - 50 Channel Manual

Product: