570017
10
Zoom out
Zoom in
Previous page
1/44
Next page
10
The
POWER
jack powers the scanner and disconnects the internal bat-
teries. You can use this jack to connect an external power source (AC
or DC adapter), regardless of the type of batteries you install.
The
CHARGE
jack supplies power to operate the scanner and also
charges the internal batteries. Use the
CHARGE
jack only when you
have installed rechargeable nickel-cadmium batteries.
Warning:
Never use the
CHARGE
jack when you have installed non-
rechargeable batteries. If you try to recharge non-rechargeable batter-
ies, they become very hot and could explode.
Remove the plastic plug from the
CHARGE
jack before you use it, then
replace the plug when you finish.
USING STANDARD AC POWER
To power the scanner from AC power, you need an AC adapter such
as RadioShack Cat. No. 273-1665. Plug the adapter’s 3.4 mm outer di-
ameter/1.3 mm inner diameter barrel plug into the scanner’s
POWER
jack. Then plug the adapter’s power module into a standard AC outlet.
Warning:
Do not use an AC adapter’s polarized plug with an extension
cord, receptacle, or other outlet unless the blades can be fully inserted
to prevent blade exposure.
CHARGE Jack
20-311a.fm Page 10 Friday, February 12, 1999 4:51 PM
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for RadioShack PRO-71 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of RadioShack PRO-71 in the language / languages: English as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info