Manual RadioShack PRO-66 - 50 Channel (page 37 of 40) (English)

570001

Zoom out

Zoom in

1/40

RESETTING THE SCANNER

If the scanner’s display locks up or does not work properly after you con-

nect power, you might have to reset the scanner.

Caution:

This procedure clears all the information you have pro-

grammed into the scanner. Before you reset the scanner, try turning it

off and on to see if it begins working properly. Use the following proce-

dure only when you are sure your scanner is not working properly.

1. Turn off the scanner.

2. While you press and hold down the

and

keys, turn on the scan-

ner.

PROBLEM POSSIBLE CAUSE REMEDY

Poor or no recep-

tion.

• Batteries are

weak or dead.

• Environment is

not suitable for

reception by the

scanner.

• Improperly con-

nected antenna.

• Check the batteries,

or make sure the

scanner is plugged

into a working AC or

DC outlet.

• Relocate the scanner

and try again.

• Be sure the antenna is

properly connected.

Error

appears on

the display.

Programming error. Reprogram the frequency

correctly.

In the scan mode,

the scanner locks

on frequencies that

have an unclear

transmission.

Programmed frequen-

cies are the same as

“birdie” frequencies.

Avoid programming fre-

quencies listed under “Bird-

ie Frequencies” on

Page 29 or only listen to

them manually.

20-511.fm Page 37 Wednesday, August 4, 1999 2:13 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of RadioShack PRO-66 - 50 Channel in the language / languages: English as an attachment in your email.

The manual is 0,5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

RadioShack PRO-66 - 50 Channel Manual

Product: