Manual RadioShack PRO-29 - 60 Channel (page 9 of 40) (English)

570002

Zoom out

Zoom in

1/40

USING VEHICLE BATTERY POWER

You can power the scanner from your vehicle’s battery power, if the ve-

hicle has a 12-volt, negative ground electrical system. To do so, you

need a Radio Shack DC Universal Adapter, Cat. No. 270-1560.

Cautions:

• You must use a DC adapter that supplies (regulated) 9-volt power

and delivers at least 300 milliamps. Its center tip must be set to

negative, and its plug must correctly fit the scanner’s

DC 9V

POWER

jack. The recommended adapter meets these specifica-

tions. Using an adapter that does not meet these specifications

could seriously damage your scanner or the adapter.

• To protect your vehicle’s electrical system, always plug the adap-

ter into the scanner before you plug it into your vehicle’s cigarette-

lighter socket. Always unplug the adapter from the vehicle’s

cigarette-lighter socket before you unplug it from the scanner.

1. Connect the DC adapter’s orange barrel-plug to the adapter’s

cable, with the tip set to –.

2. Set the adapter’s voltage switch to 9V.

3. Insert the barrel plug into the scanner’s

DC 9V POWER

jack.

4. Plug the other end of the adapter into your vehicle’s cigarette-

lighter socket.

Notes:

• If you installed rechargeable nickel-cadmium batteries in the scan-

ner, remove the cap from the

CHARGE

jack and connect the AC

adapter to it. This powers the scanner and recharges the batteries

at the same time. See “Charging Nickel-Cadmium Batteries.”

20-509.fm Page 9 Wednesday, August 4, 1999 1:58 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of RadioShack PRO-29 - 60 Channel in the language / languages: English as an attachment in your email.

The manual is 0,61 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

RadioShack PRO-29 - 60 Channel Manual

Product: